Aosite, saj 1993
Vodnik za nakup ročaja predala v strojni opremi AOSITE
Danes AOSITE Hardware Precision Manufacturing Co.Ltd usmerja pozornost na ohranjanje visoke ravni tehnološkega razvoja, za katerega menimo, da je ključnega pomena za proizvodnjo predalnih ročajev. Dobro ravnovesje med specializacijo in prilagodljivostjo pomeni, da so naše proizvodne metode osredotočene na proizvodnjo z največjo dodano vrednostjo, ki je dobavljena s hitro in učinkovito storitvijo za izpolnjevanje potreb posameznega trga.
Naša predanost zagotavljanju prednostnega AOSITE je tisto, kar vedno počnemo. Da bi zgradili močne in dolgotrajne odnose s strankami in jim pomagali doseči donosno rast, smo okrepili svoje strokovno znanje in izkušnje v proizvodnji ter zgradili izjemno prodajno mrežo. Svojo blagovno znamko širimo s krepitvijo vpliva "kitajske kakovosti" na svetovnem trgu - do zdaj smo dokazali "kitajsko kakovost" z zagotavljanjem izdelkov najvišje kakovosti strankam.
Vzorci se lahko vroči za ročaj predala kot predhodni pregled kakovosti. Tako pri AOSITE ne varčujemo z vsemi močmi, da strankam zagotovimo prvovrstne storitve vzorcev. Poleg tega se lahko MOQ prilagodi zahtevam strank.
ni podatkov
Vrste pohištvenih drsnikov za predale
Ko gre za izbiro pravih drsnikov predalov za vaše pohištvo, je pomembno, da se zavedate različnih vrst, ki so na voljo. Izbira pravilnega tipa drsnika predalov je bistvenega pomena za zagotovitev nemotenega in varnega delovanja. V tem članku bomo razpravljali o različnih vrstah drsnikov za predale in njihovih specifikacijah, kar vam bo omogočilo premišljeno odločitev pri nakupu.
Kaj so predalni drsniki?
Drsniki predalov, imenovani tudi drsniki predalov ali vodila, so komponente strojne opreme, ki omogočajo nemoteno odpiranje in zapiranje predalov v kosih pohištva, kot so omare, pisarniške omare in kopalniške omarice. Zagotavljajo potrebno podporo in stabilnost za premikanje predalov, kar zagotavlja enostavno uporabo.
Specifikacije drsnikov predalov
Drsniki za predale so na voljo v različnih specifikacijah in velikostih, da zadovoljijo različne potrebe pohištva. Najpogostejše velikosti, ki so na voljo na trgu, vključujejo 10 palcev, 12 palcev, 14 palcev, 16 palcev, 18 palcev, 20 palcev, 22 palcev in 24 palcev. Te velikosti ustrezajo različnim dimenzijam predalov, kar vam omogoča, da izberete ustrezno dolžino vodila za vaše posebne zahteve.
Vrste drsnikov za predale
1. Drsna vodila iz jeklene krogle: Drsna vodila iz jeklene krogle so najbolj priljubljena izbira za sodobno pohištvo. Te dvodelne ali tridelne drsne tirnice imajo jeklene kroglice, ki zagotavljajo nemoteno potiskanje in vlečenje ter veliko nosilnost. Enostavno jih je namestiti na stranico predalov, kar prihrani prostor. Jeklene kroglične drsne tirnice lahko tudi blažijo zapiranje ali odboj, da se odprejo, kar pohištvu doda funkcionalnost.
2. Drsna vodila z orodjem: Drsna vodila z orodjem, vključno s skritimi drsnimi tirnicami in drsnimi tirnicami za jahanje, veljajo za srednje do visokokakovostne možnosti. Te drsne tirnice uporabljajo zobniško strukturo, ki omogoča sinhronizirano in gladko gibanje. Tako kot drsna vodila z jeklenimi kroglami lahko tudi drsna vodila z zobatim obročem zagotovijo blaženje zapiranja ali odboja, da se odprejo. Zaradi relativno višjih stroškov se običajno uporabljajo v pohištvu srednjega in višjega razreda.
3. Drsna vodila z valji: Drsna vodila z valji so prva generacija tihih drsnih vodil za predale. Sestavljeni so iz enega škripca in dveh tirnic, ki zagotavljajo zadovoljivo funkcionalnost za vsakodnevno potiskanje in vlečenje. Vendar imajo valjčne drsne tirnice nizko nosilnost in nimajo funkcij blaženja in odboja, ki jih imajo druge vrste. Kot taki se večinoma uporabljajo za predale za računalniško tipkovnico in predale za luči in so jih v sodobnem pohištvu postopoma nadomestile drsne tirnice z jekleno kroglo.
4. Drsna vodila iz najlona, odporna proti obrabi: za drsna vodila iz najlona je značilna odlična odpornost proti obrabi. Zagotavljajo gladko in tiho premikanje predala z mehkim odbojem. Medtem ko so v celoti najlonske drsne tirnice razmeroma redke na trgu, so na voljo številne drsne tirnice, ki vključujejo najlonske komponente za izboljšano delovanje.
Pri izbiri predalnih drsnikov za vaše pohištvo upoštevajte posebne zahteve vaših predalov in želeno raven funkcionalnosti. Ne glede na to, ali se odločite za drsna vodila z jekleno kroglo, zobnikom, valjčkom ali na obrabo odporna najlonska vodila, izberite ustrezno velikost in zagotovite, da so pravilno nameščena za optimalno delovanje. Z ozaveščeno izbiro lahko izboljšate uporabnost in dolgo življenjsko dobo vaših pohištvenih predalov.
Obstaja več vrst pohištvenih vodil, vključno s krogličnimi, valjčnimi in spodnjimi vodili. Drsna predala so na voljo v različnih vrstah, kot so stranski nosilec, sredinski nosilec in evropski diapozitivi.
When it comes to installing drawer tracks, it's important to know the different components involved and their proper alignment. This article will provide a detailed guide on how to install the outer, middle, and inner rails of a three-slide rail drawer cabinet. Additionally, we'll cover how to adjust the tightness of the drawer slide rail and provide information on different types of slide rails available in the market.
Step 1: Understanding the Drawer Track Structure
Before we get started with the installation process, let's familiarize ourselves with the structure of a three-slide rail drawer cabinet. The sliding track consists of an outer rail, middle rail, and inner rail.
Step 2: Removing the Inner Guide Rail
To begin the installation, remove the inner guide rail from the edge of the drawer. You'll notice a spring at the back of the rail. Press lightly on both sides to remove the inner guide rail. Remember, the outer rail and middle rail are connected and cannot be separated.
Step 3: Installing Outer and Middle Rails
First, install the outer and middle rails on both sides of the drawer box. Then, fix the inner inverted frame on the side of the drawer. It's important to ensure correct alignment between the outer and inner rails to ensure the back of the drawer fits properly. If your furniture already has pre-drilled holes in the drawer cabinet and side, you can install the rails directly without the need for additional drilling.
Step 4: Assembling the Drawer
Before installing the slide rails, assemble the drawer as a whole. Look for two holes on the guide rail, which allow you to adjust the drawer's position up and down as well as front and back.
Step 5: Installing Inner and Outer Rails
Now it's time to install the inner and outer rails. The positions of the inner and outer rails should align. Secure the inner rail to the drawer cabinet using screws. Then, tighten the remaining screws that have not been locked yet.
Step 6: Repeat the Process on the Other Side
Using the same method, install the drawer tracks on the other side. Ensure the inner rails on both sides remain horizontal for proper alignment.
Step 7: Testing and Adjusting
After completing the installation, pull out the drawers to check if they function properly. If any issues arise, readjust the rails accordingly.
Adjusting the Tightness of the Drawer Slide Rail
If you need to adjust the tightness of the drawer slide rail, follow these steps:
Step 1: Remove the Slide Rail
First, take out the slide rail from the drawer and place it as shown in the diagram below.
Step 2: Check the Movement
Examine the movable track of the slide rail to ensure it moves smoothly without any obstructions.
Step 3: Locate the Fixed Rail Position
Find the position of the fixed rail, which needs to be installed on the cabinet.
Step 4: Install the Fixed and Inner Rails
Pull out the inner rail of the slide rail and install the fixed rail inside the cabinet. Then, install the inner rail on the drawer and adjust the tightness by changing the hole position.
Step 5: Reassemble the Drawer
After installation, reinsert the drawer into the fixed rail to complete the adjustment.
Different Types of Drawer Slide Rails
1. Roller Type
The roller type is the first generation of silent drawer slide rails. Though it's been gradually replaced by steel ball slide rails, it's still used in computer keyboard drawers and light drawers due to its daily push and pull capabilities. However, it lacks in bearing capacity, buffering, and rebound functions.
2. Steel Ball Type
Steel ball slide rails are commonly used in modern furniture. They consist of two or three-section metal rails installed on the side of the drawer. They provide smooth sliding, high load-bearing capacity, and often feature buffer closing and rebound opening functions.
3. Gear Type
Gear slide rails are medium to high-end options, known for their smooth and synchronous movement. They include hidden slide rails and horse-riding slide rails. Though relatively expensive, these slide rails offer cushioning and closing or pressing rebound functionalities.
4. Damping Slide Rail
Damping slide rails utilize the buffering performance of liquids to provide a sound-absorbing and buffering effect. They are known for their soft and silent closing, making them an ideal choice for high-grade furniture. The hydraulic buffer technology they employ ensures a comfortable closing effect and saves maintenance effort.
Installing drawer tracks might seem like a daunting task, but with a clear understanding of the process, it can be a straightforward endeavor. By following the step-by-step guide provided in this article, you'll be able to install and adjust the drawer slide rails with ease. Remember to choose a slide rail type that best suits your furniture and functional requirements.
Sure, here is an example of a FAQ English article about installing drawer slide rail structures:
FAQ: How to Install Drawer Slide Rail Structures
Q: What tools do I need to install drawer slide rail structures?
A: You will need a drill, screwdriver, measuring tape, and level.
Q: How do I measure for the correct size of drawer slide rail?
A: Measure the length of the drawer and the depth of the drawer cavity to ensure a proper fit.
Q: What is the best way to install drawer slide rail structures?
A: Start by installing the rail on the sides of the drawer, then mount the corresponding rail on the cabinet.
Q: How do I ensure the drawer slide rails are level and aligned properly?
A: Use a level and measure multiple times to ensure accurate placement.
Q: What do I do if the drawer slide rails are not sliding smoothly?
A: Check for any obstructions or misalignment, and make adjustments as needed.
Q: Are there any tips for maintaining drawer slide rail structures?
A: Keep the rails clean and lubricated for smooth operation, and periodically check for any loose screws or hardware.
Q: Can I install drawer slide rail structures on my own?
A: Yes, with the proper tools and following the manufacturer's instructions, it is possible to install drawer slide rails on your own.
Remember to always follow the specific instructions provided by the manufacturer of your drawer slide rail structures for the best results. Let us know if you have any additional questions or concerns.
Step 1: Understanding the Drawer Track Structure
Before we get started with the installation process, let's familiarize ourselves with the structure of a three-slide rail drawer cabinet. The sliding track consists of an outer rail, middle rail, and inner rail.
Step 2: Removing the Inner Guide Rail
To begin the installation, remove the inner guide rail from the edge of the drawer. You'll notice a spring at the back of the rail. Press lightly on both sides to remove the inner guide rail. Remember, the outer rail and middle rail are connected and cannot be separated.
Step 3: Installing Outer and Middle Rails
First, install the outer and middle rails on both sides of the drawer box. Then, fix the inner inverted frame on the side of the drawer. It's important to ensure correct alignment between the outer and inner rails to ensure the back of the drawer fits properly. If your furniture already has pre-drilled holes in the drawer cabinet and side, you can install the rails directly without the need for additional drilling.
Step 4: Assembling the Drawer
Before installing the slide rails, assemble the drawer as a whole. Look for two holes on the guide rail, which allow you to adjust the drawer's position up and down as well as front and back.
Step 5: Installing Inner and Outer Rails
Now it's time to install the inner and outer rails. The positions of the inner and outer rails should align. Secure the inner rail to the drawer cabinet using screws. Then, tighten the remaining screws that have not been locked yet.
Step 6: Repeat the Process on the Other Side
Using the same method, install the drawer tracks on the other side. Ensure the inner rails on both sides remain horizontal for proper alignment.
Step 7: Testing and Adjusting
After completing the installation, pull out the drawers to check if they function properly. If any issues arise, readjust the rails accordingly.
Adjusting the Tightness of the Drawer Slide Rail
If you need to adjust the tightness of the drawer slide rail, follow these steps:
Step 1: Remove the Slide Rail
First, take out the slide rail from the drawer and place it as shown in the diagram below.
Step 2: Check the Movement
Examine the movable track of the slide rail to ensure it moves smoothly without any obstructions.
Step 3: Locate the Fixed Rail Position
Find the position of the fixed rail, which needs to be installed on the cabinet.
Step 4: Install the Fixed and Inner Rails
Pull out the inner rail of the slide rail and install the fixed rail inside the cabinet. Then, install the inner rail on the drawer and adjust the tightness by changing the hole position.
Step 5: Reassemble the Drawer
After installation, reinsert the drawer into the fixed rail to complete the adjustment.
Different Types of Drawer Slide Rails
1. Roller Type
The roller type is the first generation of silent drawer slide rails. Though it's been gradually replaced by steel ball slide rails, it's still used in computer keyboard drawers and light drawers due to its daily push and pull capabilities. However, it lacks in bearing capacity, buffering, and rebound functions.
2. Steel Ball Type
Steel ball slide rails are commonly used in modern furniture. They consist of two or three-section metal rails installed on the side of the drawer. They provide smooth sliding, high load-bearing capacity, and often feature buffer closing and rebound opening functions.
3. Gear Type
Gear slide rails are medium to high-end options, known for their smooth and synchronous movement. They include hidden slide rails and horse-riding slide rails. Though relatively expensive, these slide rails offer cushioning and closing or pressing rebound functionalities.
4. Damping Slide Rail
Damping slide rails utilize the buffering performance of liquids to provide a sound-absorbing and buffering effect. They are known for their soft and silent closing, making them an ideal choice for high-grade furniture. The hydraulic buffer technology they employ ensures a comfortable closing effect and saves maintenance effort.
Installing drawer tracks might seem like a daunting task, but with a clear understanding of the process, it can be a straightforward endeavor. By following the step-by-step guide provided in this article, you'll be able to install and adjust the drawer slide rails with ease. Remember to choose a slide rail type that best suits your furniture and functional requirements.
Sure, here is an example of a FAQ English article about installing drawer slide rail structures:
FAQ: How to Install Drawer Slide Rail Structures
Q: What tools do I need to install drawer slide rail structures?
A: You will need a drill, screwdriver, measuring tape, and level.
Q: How do I measure for the correct size of drawer slide rail?
A: Measure the length of the drawer and the depth of the drawer cavity to ensure a proper fit.
Q: What is the best way to install drawer slide rail structures?
A: Start by installing the rail on the sides of the drawer, then mount the corresponding rail on the cabinet.
Q: How do I ensure the drawer slide rails are level and aligned properly?
A: Use a level and measure multiple times to ensure accurate placement.
Q: What do I do if the drawer slide rails are not sliding smoothly?
A: Check for any obstructions or misalignment, and make adjustments as needed.
Q: Are there any tips for maintaining drawer slide rail structures?
A: Keep the rails clean and lubricated for smooth operation, and periodically check for any loose screws or hardware.
Q: Can I install drawer slide rail structures on my own?
A: Yes, with the proper tools and following the manufacturer's instructions, it is possible to install drawer slide rails on your own.
Remember to always follow the specific instructions provided by the manufacturer of your drawer slide rail structures for the best results. Let us know if you have any additional questions or concerns.
Telo članka:
Namestitev drsnikov za predale se morda zdi zapletena, vendar je s pravimi navodili lahko enostaven postopek. Sledite tem korakom, da zagotovite uspešno namestitev, ki omogoča nemoteno delovanje vaših predalov.
1. korak: Razumevanje postopka namestitve
Drsniki predalov so sestavljeni iz treh glavnih delov: zunanjega vodila, srednjega vodila in notranjega vodila. Pomembno je, da se seznanite s temi komponentami, preden nadaljujete z namestitvijo.
2. korak: Razstavljanje notranjega vodila
Za začetek namestitve odstranite notranjo tirnico z glavnega dela drsnika predala. Poiščite vzmetno zaponko na hrbtni strani drsne tirnice predala in jo odstranite tako, da sprostite zaponko.
3. korak: Namestitev zunanjega in srednjega vodila
Namestite zunanje in srednje vodilne dele deljivega drsnika na obe strani predalne škatle. Če delate s končnim pohištvom, imate morda že vnaprej izvrtane luknje za enostavno namestitev, če pa ne, boste morali luknje izvrtati sami.
4. korak: Namestitev notranje tirnice
Nato namestite notranjo tirnico na stransko ploščo predala. Pazite, da ga poravnate z nameščenimi zunanjimi in srednjimi tirnicami. Po potrebi izvrtajte luknje, da pritrdite notranjo tirnico na dolžino predalne omare.
5. korak: Prilagajanje in poravnava tirnic
Ko so vodila nameščena, sestavite predal in nastavite višino in položaj od spredaj proti zadaj z uporabo nastavitvenih lukenj na vodilih. Bistveno je zagotoviti, da sta leva in desna drsna tirnica v enakem vodoravnem položaju.
6. korak: Pritrditev notranjega in zunanjega vodila
Z vijaki pritrdite notranja vodila na izmerjeni položaj na omari s predali, tako da so poravnana z že nameščenimi srednjimi in zunanjimi vodili.
7. korak: Ponovite postopek na drugi strani
Sledite istim korakom na drugi strani predala, pri čemer pazite, da bodo notranje tirnice vodoravne in vzporedne, da bo drsenje potekalo gladko.
8. korak: Preverjanje pravilne funkcionalnosti
Po namestitvi preizkusite predal tako, da ga povlečete navznoter in ven. Če se premika gladko in brez težav, je namestitev končana.
Namestitev drsnikov predalov pohištva:
Pri postavljanju drsnikov pohištvenih predalov upoštevajte naslednje korake:
1. korak: Pritrditev desk predalov
Začnite s pritrditvijo petih plošč sestavljenega predala z vijaki. Prepričajte se, da ima plošča predala režo za kartico in dve luknji na sredini za namestitev ročaja.
2. korak: Razstavljanje in namestitev drsnih tirnic predala
Razstavite drsna vodila predala, ločite ozka vodila za stranske plošče predala in širša vodila za telo omare. Širše vodila, ki ste jih prej odstranili, namestite na stransko ploščo ohišja in jih pritrdite z majhnimi vijaki.
3. korak: Dokončanje namestitve vodila za predal
Namestite ozke drsne tirnice predalov na stranske stranice predala. Razlikujte med sprednjim in zadnjim položajem
Diagram pozicionirne luknje drsne tirnice predala:
1. Izmerite in označite položaj drsne tirnice na stranski plošči predala.
2. S svedrom naredite pozicionirno luknjo za vijake.
3. Drsno vodilo pritrdite na predal z uporabo lukenj za pozicioniranje kot vodilo.
4. Prepričajte se, da je drsna tirnica ravna in pritrjena, preden namestite drugo stran.
FAQ:
V: Kako naj vem, kam naj na predalu postavim pozicionirne luknje?
O: Izmerite in označite položaj drsne tirnice na stranski plošči predala, preden izvrtate luknje.
V: Ali lahko namestim drsno vodilo, ne da bi naredil luknje za pozicioniranje?
O: Priporočamo, da naredite pozicionirne luknje, da zagotovite, da je drsna tirnica pravilno poravnana in varna.
V: Katera orodja potrebujem za namestitev drsne tirnice na predal?
O: Za pravilno namestitev drsne tirnice boste potrebovali vrtalnik, vijake, izvijač in nivo.
ni podatkov
Kontaktiraj nas
Pozdravljamo modele in ideje po meri in se lahko zadovoljijo s posebnimi zahtevami. Za več informacij obiščite spletno stran ali nas kontaktirajte neposredno z vprašanji ali poizvedbami.
Spremenite trg in jezik
