Specific installation method of damping hinge_knowledge of hinge 3

Damping hinges, a part of HingeIt, consist of three components: a support, a buffer, and a liquid that provides cushioning effects. These hinges are commonly used in various furniture pieces like wardrobes, bookcases, wine cabinets, and lockers. While they are ubiquitous in our daily lives, not many people are aware of how to install them properly.

There are three main installation methods for damping hinges:

1. Full cover: In this method, the cabinet door completely covers the side panel of the cabinet, leaving a gap for safe opening. Straight arm hinges with a 0 mm gap are required for this installation.

2. Half cover: Two doors share a single side panel in this installation. A minimum total clearance is needed between the doors, which reduces the distance covered by each door. Hinges with curved arms of medium curvature (9.5mm) are used.

3. Built-in: In this case, the door is placed inside the cabinet alongside the side panels. Clearance is necessary for safe opening of the door. Hinges with a highly curved hinge arm (16mm) are needed for this installation.

Here are some tips for hinge installation:

1. Minimum clearance: The minimum distance from the side of the door when it is opened. This clearance is determined by the C distance, door thickness, and hinge type. Rounded doors require a reduced minimum clearance, and specific values can be found in corresponding tables for different hinges.

2. Minimum clearance for half cover doors: When two doors share a side panel, the total clearance required should be twice the minimum clearance to allow simultaneous opening of both doors.

3. C distance: The distance between the door edge and the edge of the hinge cup hole. Different hinge models have varying maximum C sizes, which affect the minimum clearance. Larger C distances result in smaller minimum clearances.

4. Door coverage distance: The distance the door covers the side panel.

5. Gap: The distance from the outside of the door to the outside of the cabinet in full cover installations, the distance between two doors in half cover installations, and the distance from the outside of the door to the inside of the cabinet side panel in built-in installations.

6. Number of hinges required: The width, height, and material quality of the door determine how many hinges are needed. Factors may vary in different situations, so the listed number of hinges should be used as a reference. When in doubt, it is recommended to conduct an experiment. Increasing the distance between hinges enhances stability.

Most people rely on professionals for furniture installation and may not have experience installing damping hinges themselves. However, it is not necessary to hire special staff for service and maintenance. With a little effort, you can successfully install these small hinges at home, saving time and hassle.

AOSITE Hardware focuses on improving product quality through continuous research and development. Their hinges are highly regarded both domestically and internationally. Offering excellent customer service is a priority for AOSITE Hardware. The use of eco-friendly materials makes their hinges easy to install, durable, and corrosion-resistant. These hinges find applications in luxury villas, residential areas, tourist resorts, parks, hotels, stadiums, and museums.

AOSITE Hardware is committed to technical innovation, flexible management, and equipment upgrades to enhance production efficiency. Advanced technologies like welding, chemical etching, surface blasting, and polishing contribute to superior product performance. The hinges are made from safe and high-quality materials, certified for national product quality. They are radiation-free with no harmful effects on the human body. With their energy-saving function, they offer cost-effectiveness and do not excessively consume electricity even with frequent use.

Established in [year of establishment], AOSITE Hardware has continuously improved its product quality and service. They provide quality tools and services, offering a 100% refund guarantee if the return is due to product quality issues or errors on their part.

Are you ready to dive into the world of {blog_title} and discover all the amazing tips, tricks, and secrets that will take your skills to the next level? Join us on this exciting journey as we explore everything you need to know about {blog_topic}. Get ready to be inspired, informed, and entertained as we delve deep into the fascinating world of {blog_title}!