How to install the three-section slide rail - how to install the drawer slide rail

Drawer slide rails are essential components for smooth and convenient operation of drawers in various furniture pieces. This guide will walk you through the step-by-step process of installing different types of drawer slide rails, including three-section slide rails, hidden slide rails, and three-fold slide rails.

Installing Three-Section Drawer Slide Rails:

1. Begin by understanding the three parts of the sliding track: outer rail, middle rail, and inner rail. These three components ensure proper movement and stability of the drawer.

2. Remove the inner guide rail from the drawer by gently pressing the spring at the back and pulling it out. Remember, the outer and middle rails are connected and cannot be separated.

3. Install the outer and middle rails on both sides of the drawer box. Then, fix the inner inverted frame on the side of the drawer, ensuring proper alignment of the outer and inner rails.

4. Assemble the entire drawer before installing the slide rails. There are two adjustment holes on the guide rail that allow you to adjust the vertical and horizontal position of the drawer.

5. Install the inner and outer rails on both sides, ensuring they are aligned. Screw the inner rail to the drawer cabinet, leaving some loose screws for final adjustments.

6. Repeat the same process on the other side, ensuring the horizontal alignment of the inner rails.

7. After installation, test the drawer by pulling it out several times. Make any necessary adjustments for smooth movement.

Installing Three-Section Ball Slide Rails:

1. To remove the inner rail, press the plastic piece located at the back of the rail and pull it down. Then, fit the inner rail into the drawer.

2. Install the outer rails on the table and secure them with screws. Fit the drawer with the inner rails into the slide rails, ensuring a proper connection.

3. Ensure that the drawer slide rails are functioning properly by testing the drawer movement.

Determining Drawer Slide Rail Size and Usage Tips:

1. Measure the length and depth of the drawer to select the appropriate slide rail size.

2. Ensure that the drawer is not uneven by checking the position of the mounting holes and the angle of the drawer.

3. If the drawer is not sliding smoothly, loosen the gap between the drawer and the slide rail by adjusting it by 1-2mm.

4. If you have multiple drawers, ensure that the slide rails are installed in the same position for each drawer.

5. If the drawer derails while being pulled, reduce the gap between the installation size to rectify the issue.

Proper installation of drawer slide rails is crucial for the smooth operation of drawers. By following the step-by-step instructions provided in this guide, you can ensure that your drawers are well-aligned and functioning flawlessly. Remember to measure carefully, align all components correctly, and make any necessary adjustments for optimal drawer performance.