Old-fashioned roller drawer slide installation - How to install drawer slides Drawer slide installat

How to Install Drawer Slides Properly

Installing drawer slides correctly is crucial for smooth operation and functionality of your drawers. In this article, we will provide step-by-step instructions on how to install drawer slides effectively.

Step 1: Prepare the Rails

Start by removing the inner rail from the main body of the drawer slide. Then, install the outer rail and inner rail on both sides of the drawer box.

Step 2: Install the Inner Rail

Next, install the inner rail on the side panel of the drawer. Make sure to check if the left and right slide rails are at the same level. Secure the inner rail with screws onto the inner rail of the drawer.

Step 3: Test the Installation

To verify if the installation is successful, pull the drawer to see if it slides smoothly. If the drawer can be pulled without any resistance, the installation is complete.

Drawer Bottom Slide Rail Installation Method:

Now, let's focus on the installation of the drawer bottom slide rail. Follow these steps carefully:

Step 1: Separate the Rail

Move the small plastic sheet located in the middle of the rail to one side, separating the rail into two parts.

Step 2: Attach the Rail to the Drawer

Place the part without balls (with a small plastic sheet) on the drawer and secure it with wood screws, ensuring to note the correct direction.

Step 3: Attach the Rail to the Table

Attach the part with the ball (with the rail) to the table using wood screws, again noting the correct direction.

Step 4: Finalize the Installation

Move the small plastic sheet in the middle of the drawer rail to one side and push the drawer in to complete the installation.

Installation Method of Furniture Drawer Slides:

Follow these steps to install drawer slides for furniture:

Step 1: Understand the Types of Rails

Furniture drawer slides consist of outer rails, middle rails, and inner rails. Take note of the different types and their placement.

Step 2: Remove the Inner Rails

Remove the inner rails of the pulleys from the main body of the drawer slides by gently pressing the spring buckle. Be careful not to forcefully disassemble the middle and inner rails to avoid damaging the drawer slide rails.

Step 3: Install the Rails

Install the outer rail and middle rail on both sides of the drawer box. Install the inner rail on the side panel of the drawer, ensuring proper alignment. If necessary, drill holes for proper installation.

Step 4: Adjust the Drawer Distance

Observe the drawer as a whole, using the two holes on the track to adjust the distance between the drawers for even alignment.

Step 5: Secure the Rails

Once the desired alignment is achieved, fix the inner and outer rails with screws. Ensure both sides are horizontally aligned. Test the drawers by sliding them in and out to ensure proper functionality.

Removing and Installing Drawer Slides:

To remove the drawer slides, pull out the drawer and press the buckle to release it. When installing, determine the size, screw on the screws, and install them in the cabinet.

Types of Drawer Slides:

Different types of drawer slides are available to suit your needs:

1. Bottom-supporting type: Provides durability, noiseless operation, and self-closing capabilities.

2. Steel ball type: Offers smooth operation, easy installation, durability, and stability.

3. Roller type: Features a simple structure with pulleys and tracks for daily push and pull needs.

4. Wear-resistant nylon slide rail: Ensures long-lasting smoothness and a soft rebound.

In conclusion, AOSITE Hardware specializes in providing high-quality drawer slides suitable for various applications. With a focus on innovation and customer satisfaction, AOSITE Hardware is committed to delivering excellent products and services. Install your drawer slides correctly and enjoy smooth and functional drawers.