Sliding door track hanging slide rail wardrobe - what kind of wardrobe sliding door track is better

What kind of better wardrobe sliding door track is there?

part1 wardrobe sliding door price

Good-quality wardrobe sliding doors have high technical content, but it is difficult for consumers to identify them from the appearance. In fact, you can feel and experience its sliding effect in person. Good-quality wardrobe sliding doors will not be too slippery when sliding. Light and not too heavy, but with a certain weight of the door, there is no vibration when sliding, smooth and textured. The price of wardrobe sliding doors will always be affected by the material, size and brand, so the price range is relatively large The price of the wardrobe sliding door

part2 Wardrobe sliding door material

At present, the material of wardrobe sliding doors is basically melamine board, and some are in the form of board and glass. Domestic melamine boards such as Lushuihe are good. Custom-made wardrobe sliding doors and on-site manufacturing have their own advantages. , there are basically styles that can be selected for custom-made patterns, and can be changed flexibly on site. You must pay attention to the selection of custom-made doors to prevent them from being shoddy. Wardrobe sliding door material

part3 wardrobe sliding door size

The size of the track box on the upper part of the sliding door should be 12 cm high and 9 cm wide. Like a curtain box, a track is installed in the track box, and the sliding door can be hung on the track. When the height of the door is lower than 1.95 meters, people It feels very depressed. Therefore, when making a sliding door, the height must be at least 19512=207 cm. The size of the wardrobe sliding door

part4 wardrobe sliding door track

When installing the sliding door track, fix the upper track, hang 3 points on the two ends and the middle point of the upper track with a gravity cone (suspension hammer), draw a 3.3-point fixed surface on the ground with an oil pen, install the upper track, and then face the upper track Put a hanging hammer to the ground at the center point of the track, put vertical lines at both ends of the track, and fix the lower track at these three points so as to ensure that the upper and lower tracks are completely parallel, and the sliding door is in the best state. wardrobe sliding door track

Wardrobe sliding door maintenance method How to install wardrobe sliding door slide rail installation precautions

1. Summary of maintenance methods for wardrobe sliding doors

1. Wardrobe sliding door maintenance - conventional method

(1) There is a screw on the top side of the door of the hanging rail sliding door, which is mainly used to fix the slide rail. After removing the screws on both sides of the door, try to raise the door and fix it in the corresponding position, and then use a screwdriver to fix the slide rail. Slide out in the opposite direction of the track.

(2) When the two pulleys are separated, the door will automatically fall down. You must hold it up by yourself, dont hurt people, and dont hit the ground directly. The necessary accessories for sliding doors and windows have pulleys. Due to different quality, the price is very different. big difference.

(3) Good hollow glass heat-insulated broken bridge doors and windows generally cost about 7 yuan each. The service life of the pulley is limited. After a certain number of years of use, you need to check it yourself.

2. Wardrobe sliding door maintenance - general method

After separating the pulley, do not turn the direction of the pulley, you will find a small track on the top of the sliding door, this is the problem of failure, try to use the method to fix the door, and then install it back according to the original method.

3. Wardrobe sliding door maintenance - professional maintenance

(1) If you really can't solve it by yourself, you can find a master after-sales service to solve it. This is the service content you should enjoy, and you can save a sum of money.

(2) When installing the hanging rail sliding door, the width of two doors should be left. When the front and rear space is relatively small, you can consider using the hanging rail sliding door.

(3) When installing sliding doors, try to reduce the cause of noise. The quality of the hanging rail must be good and the load-bearing capacity must be strong, otherwise it will affect the later use.

2. Matters needing attention in the installation of wardrobe sliding door slide rails

1. The sliding door is in contact with the wall or both sides of the cabinet body. At the contact position, there should be no other objects blocking the closing of the sliding door.

2. The position of the drawer in the cabinet should avoid the intersection of sliding doors, and it should be 1 cm higher than the bottom plate; the drawer in the folding door cabinet should be at least 15 cm away from the side wall, pay attention to the power switch and socket on the wall, if it is blocked When the sliding door is closed, its position should be modified in time accordingly.

Now the whole house customization is prevalent in the market, many brands and non-brands are crazy to settle in, the market price is chaotic, and the quality is also uneven. Let's take a look at what should be paid attention to when choosing custom furniture?

The second hardware accessories pulleys and guide rails

In addition to plates, custom-made furniture is hardware, plates account for a large proportion, but the role of hardware is also the finishing touch. The quality of hardware directly affects the life of furniture. There are far more types of hardware than plates in the market. Many, today we take a look at one of the wardrobe hardware sliding door pulleys rollers and rails.

The pulleys and guide rails in the sliding door wardrobe are the most frequently used accessories, so their quality directly affects the service life of the wardrobe. The quality is also uneven on the market, and there are all kinds of prices. So what exactly should it have? Functions and materials can meet the needs of the public.

The track of the sliding door can be roughly divided into: two directions can be pushed and pulled, one-way push and pull and folding style, customers can choose according to the actual situation.

The pulley in the sliding door track pulley is a very important accessory in the sliding door. When purchasing, you must know what your material is. The current pulley material is divided into three types: plastic pulley, which is hard but fragile. Use After a period of time, the sliding door will not be smooth; the quality of the metal pulley is better, but the noise is very loud; the glass pulley is the best of these three pulleys, with excellent toughness and wear resistance, and it is very convenient to push and pull , and has a long service life.

Sliding door guide rails are more important for sliding doors. Different material quality affects the different quality and use effect of sliding doors, and the service life of high-quality sliding door materials will be longer. The most important thing for the track is whether it can be compatible with The pulley fits perfectly and the size is just right. This is the most important thing. Such a sliding door slides smoothly, has good shock absorption and noise resistance, and has a better mute effect. When consumers choose sliding door rails, they must To choose a good quality guide rail suitable for your house type, choose a guide rail that is wear-resistant, not easy to deform, and has a good push-pull feel.

For other details, whether the guide rails and pulleys are easy to clean, whether they are quiet, whether there are locks and internal structures, whether they are resistant to high temperature and oxidation should be asked clearly. What is the size of the track of the wardrobe sliding door?

The general sliding door track is 84mm, and the generally reserved position is 100mm. Now there is a track width of 70mm, but the sliding door frame corresponding to this track is also matched.

The height of the door is preferably above 207 cm, so that the whole room will not appear too depressing. The best sliding door track size is about 80 cm by 200 cm, so that the height of the door is very stable and looks good.

Consumers should know which tracks are available before knowing the size of the sliding door track. The track of the sliding door can be roughly divided into: the track that can be pushed and pulled in two directions, the one-way and the folding sliding door. Among these three kinds, the folding sliding door The door will save space. If the consumer chooses to make a sliding door, the height of the door should be selected above 207 cm, so that the whole room will not appear too depressing. The best sliding door track size is 80 cm x With a height of about 200 cm, the door is very stable and looks good.

Of course, there are also many large houses (decoration renderings of large houses). If these consumers want to make a very high sliding door track size, they should pay attention to it, because the door is very high, and if it is often pushed and pulled, the door itself will be damaged. If it is too high, it will be unstable, and it will be more likely to cause the door to fall off. If some sliding doors are well done, it can make people visually see that the room becomes larger, for example, in the kitchen (kitchen decoration renderings) ) using the open sliding door, which not only has the treatment of partition (partition decoration renderings), but also makes the whole space bigger. Therefore, consumers should pay more attention to the choice of sliding door materials. Sliding doors of different materials have different effects, but it is best not to choose fully transparent glass, which is prone to light pollution.

There are three types of pulleys on the market: plastic pulleys, metal pulleys and fiberglass pulleys. For example, some big brands like Meizhixuan doors and windows use carbon fiberglass pulleys.

1. The metal pulley has a very strong load-bearing capacity, and can withstand great frictional strength and pressure, and is not easy to deform.

2. The rubber wheel is made of carbon fiberglass or nylon material, which can make the push and pull activities very smooth, and it is not easy to make harsh friction sounds.

3. Glass fiber rollers, this material is the most common in the use of wardrobe sliding doors, because it is not easy to deform, and the sliding is also very smooth.

Extended information:

Fiberglass pulleys are good. At present, there are generally two types of pulleys on the market: plastic pulleys and fiberglass pulleys. Plastic pulleys are hard, but they are easy to break. After a long time of use, they will become astringent, and the push-pull feeling will become very poor. The price It is also cheaper; the fiberglass pulley has good toughness, wear resistance, smooth sliding, and durability. When purchasing, be sure to recognize the material of the pulley.

Matters needing attention in the installation of wardrobe sliding door track

Nowadays, all families like to customize wardrobes. As the facade of the wardrobe, the sliding door is the most intuitive factor affecting the overall style and appearance of the wardrobe, and the sliding door is also one of the wardrobe parts that are most likely to come into contact with the human body and objects in real life. For Many consumers have some confusion about the installation of wardrobe sliding doors. The core of the installation of wardrobe sliding doors lies in the installation of tracks. Therefore, let me introduce to you next.

Wardrobe sliding door track installation

Detailed explanation.

The sliding door track is the core component of the sliding door. The most important thing to install the sliding door is

Wardrobe sliding door track installation

, the track installation is almost complete.

1. The size of the track box on the upper part of the sliding door should be 12 cm high and 9 cm wide. Like a curtain box, a track is installed in the track box, and the sliding door can be hung on the track. When the height of the door is lower than 1.95 meters, It makes people feel depressed. Therefore, when making a sliding door, the height should be at least 19512=207 cm or more.

2. The golden size of a normal door is about 80 cm 200 cm. Under this structure, the door is relatively stable and beautiful. Therefore, the ratio of the width to the height of the sliding door should be similar to the golden size.

3. Use with caution the sliding door from the floor to the top (open track box). Due to the excessive swing when pushing and pulling, the sliding door is easy to deform over time. After deformation, the door cannot be opened, which means it cannot be repaired and cannot be used.

4. Finally, install the sliding door track: fix the upper track, hang 3 points on the two ends and the middle point of the upper track with a gravity cone (suspension hammer), draw a 3.3-point fixed surface on the ground with an oil pen, install the upper track, and then Put a hanging hammer on the ground against the center point of the upper track, put vertical lines on both ends of the track, and fix the lower track on these 3 points so as to ensure that the upper and lower tracks are completely parallel, and the sliding door is in the best position. status.

to guarantee

Wardrobe sliding door track installation

The smooth progress, need to pay attention to the following points

1. Since the sliding door is in contact with the wall or both sides of the cabinet body, there should be no other objects blocking the closing of the sliding door at the contact position. For example, the position of the drawer in the cabinet should avoid the intersection of sliding doors and be higher than the bottom plate At least 1cm; the drawer in the folding door cabinet is at least 15cm away from the side wall. Here, pay special attention to the power switch and socket on the wall. If the closing of the sliding door is blocked, the position of the switch and socket should be changed.

2. No matter what material you make on the ground, you must ensure that it is level, and the four walls of the door opening must also be kept horizontal and vertical. Otherwise, the door will be skewed after installation. The adjustable error is not greater than 10mm.

3. Please do not install the corner line at the installation position. The gypsum line can be installed on the sealing plate above the closet. If the door is directly to the top, do not install the gypsum line. For carpets with a thickness of less than 5 mm, cut off the carpet at the location and paste it directly If the carpet with a thickness of more than 5 mm is installed on the lower rail, it can be directly fixed on the carpet with screws; if it is installed with a single rail, the carpet at the position must be cut off, and a 3-5 mm thick wooden strip is placed on the carpet in advance, so that The monorail is pasted directly on top.

Finally, a warm reminder,

wardrobe sliding door track

It's important, so we're doing

Wardrobe sliding door track installation

It is better to be more cautious. I hope that the wardrobe sliding door track installation I introduced today will be helpful to everyone.

What are the installation steps of sliding door wardrobe

Wardrobe sliding door slide installation steps;

1. The size of the track box on the upper part of the sliding door must be 12 cm high and 9 cm wide. Like a curtain box, a track is installed in the track box, and the sliding door can be hung on the track. When the height of the door is lower than 1.95 meters, It makes people feel very depressed. Therefore, when making a sliding door, the height should be at least 19512=207 cm.

2. The golden size of a normal door is about 80 cm x 200 cm. Under this structure, the door is relatively stable and beautiful at the same time. Therefore, the ratio of the width to the height of the sliding door should be similar to the golden size.

3. Use the sliding door from the floor to the top with caution (open track box). Due to the excessive swing when pushing and pulling, the sliding door is easy to deform over time. After deformation, the door cannot be opened, which means it cannot be repaired and cannot be used.

4. When installing the sliding door track, fix the upper track, hang 3 points on the two ends and the midpoint of the upper track with a gravity cone (hanging hammer) and draw a 3.3-point fixed surface on the ground with an oil pen, install the upper track, and then Put a hanging hammer to the ground at the center of the upper track, put vertical lines at both ends of the track, and fix the lower track at these three points to ensure that the upper and lower tracks are completely parallel, and the sliding door is in the best state. up.