Aosite, since 1993

English

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers

Type: Clip on hydraulic damping hinge
Opening angle: 100°
Diameter of hinge cup: 35mm
Pipe Finish: Nickel plated
Main material: Cold-rolled steel

Inquiry

We insist on relying on technological progress, adopt advanced technology, and introduce advanced equipment. We are committed to the development and research of Tatami Cabinet Gas Spring, Drawer Runners, Furniture Hardware Hinge. We actively recruit a large number of technical personnel, introducing advanced production equipment, and continuously optimizing product performance. Our company will target the 'global' operation strategy, and share success with partners.

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 2

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 3

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 4

Type	Clip on hydraulic damping hinge
Opening angle	100°
Diameter of hinge cup	35mm
Pipe Finish	Nickel plated
Main material	Cold-rolled steel
Cover space adjustment	0-5mm
The depth adjustment	-2mm/+3.5mm
Base adjustment (up/down)	-2mm/+2mm
Articulation cup altitude	12mm
Door drilling size	3-7mm
Door thickness	14-20mm

PRODUCT DETAILS

HOW TO CHOOSE
YOUR DOOR OVERLAYS

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 13

Full Overlay

This is the most common construction technique for cabinet doors.
You will be able to identify if your hinge is Full Overlay :
The Hinge Arm is relatively straight with no "hump" or "crank"
The Cabinet Door overlaps close to 100% on the cabinet side panel
The Cabinet Door does not share a side panel with any other cabinet door

Half Overlay

Much less common but used where space saving or material cost concerns are most important.
This technique uses the same side panel for two cabinets. To achieve this you would need a hinge that provides these features:
The Hinge Arm starts to bend inwards with a "crank" that offsets the door
The Cabinet Door only overlaps a bit less than 50% of the cabinet side panel
The Cabinet Door does not share a side panel with any other cabinet door

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 14

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 15

Inset/Embed

This is a technique of cabinet door production that allows the door to sit inside the cabinet box.
You will be able to identify that your hinges are Inset if:
The Hinge Arm is quite noticeably bent inwards or highly "cranked"
The Cabinet Door does not overlap with the side panel but sits inside

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 16

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 17

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 18

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 19

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 20

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 21

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 22

PRODUCT INSTALLATION

1. According to the installation data, drilling at the proper position of the door panel.

2. Installing the hinge cup.

3. According to the installation data, mounting base to connect the cabinet door.

4. Adjust back screw to adapt door gap, check opening and closing.

5. Check opening and closing.

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 23

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 24

165 Degree Dual Use Furniture Hinge - Clip On | Furniture Hardware Manufacturers 25

We are an energetic firm with wide market for Two Way Clip-on 165 Degree Furniture Hinge. We sincerely do our best to offer the best service for all the clients and businessmen. We insist on building a brand with integrity, expanding the market with service, and promoting development with innovation.

Hot Tags: clip on furniture hinge, China, manufacturers, suppliers, factory, wholesale, bulk, tool box drawer slide, self closing drawer slides, Furniture Gas Lift, Inseparable Cabinet Damping Hinge, door hinges 3d stainless steel, kitchen hinges

we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.