Commercial Double Inflatable Water Slide - Volcano Design

We will spare no effort to provide customers with reliable and innovative Angle Cabinet Hinge 45°, door hinge, Furniture Hinges products, and contribute to the success of customers as much as possible. It is our goal to be trusted by customers everywhere transcending national boundaries, languages and cultures and we will also move towards this goal and face various challenges into the unknown in the next several years. We are going to reply you when we receive your inquiries.

Steps1 Mark the Placement of the Slides

Measuring from the inside floor of the cabinet, mark a height of 8¼ inches near the front and back of each side wall. Using the marks and a straightedge, draw a level line across the wall on each inside wall of the cabinet. Make a mark on each line that’s 7/8 inch from the front edge of the cabinet. This allows room for the thickness of the drawer front plus an 1/8-inch inset.

Steps 2. Position the Slides

Align the bottom edge of the first slide above the line, Position the front edge of the slide behind the mark near the face of the cabinet.

Steps 3. Install the Slides

Holding the slide firmly in place, push the extension forward until both sets of screw holes are visible. Using a drill/driver, drill shallow pilot holes in one screw hole near the front and back of the slide. Using the screws provided, mount the slide to the inside of the cabinet. Repeat steps 2 and 3 to mount the second drawer slide on the opposite side of the cabinet.

PRODUCT DETAILS

We are a comprehensive company specializing in Volcano Double Inflatable Water Slide for Commercial production, sales and service, and our products are sold all over the world. Quality control group make sure the best quality. We have established in-depth strategic partnerships with distributors and customers.