Custom Wardrobe Installation Drawing - Solving How To Install Wardrobe Drawer Self-priming Slide Rai

Rewritten

Installing the Self-Priming Slide Rail for Wardrobe Drawers

To install the self-priming slide rail for wardrobe drawers, follow these steps:

1. Fix the five boards of the assembled drawer using screws. The drawer panel should have a card slot, and there should be two small holes in the middle for installing the handle.

2. Disassemble the slide and install the narrow one on the drawer side panels, while the wide ones are installed on the cabinet body. Make sure the bottom of the slide rail is flat with the bottom of the drawer side panel, and the front is flat with the front of the drawer side panel. Pay attention to the front and rear orientation.

3. Finally, install the cabinet body.

Checking and Accepting the Wardrobe Installation

When checking and accepting the wardrobe installation, consider the following factors:

Appearance:

- Observe whether the wardrobe's appearance meets the requirements. Check the color and texture of the overall furniture paint process, ensuring coordination and smoothness. Check if the color of the outer paint falls within the allowable range of color difference. Also, examine the smoothness of the paint surface, looking for bubbles or imperfections.

Craftsmanship:

- The manufacturing process of the wardrobe is crucial. Check the connection between each part, including plates and hardware, ensuring reasonable and strong connections. Whether horizontal or vertical, the connection points within the wardrobe's structure should be tightly combined without gaps. The opening and closing of drawers and doors should be flexible, with no degumming or burrs.

Structure:

- Pay attention to whether the wardrobe's structure conforms to specifications. Ensure the frame of the wardrobe is correct and firm by gently pushing it and checking for looseness. Verify that the vertical surface is perpendicular to the ground at a 90-degree angle, and the horizontal plane connected to the ground is flat enough.

Door Panel:

- Check if the door panel is installed properly, with consistent height and gap width when closed. Ensure that the door handles are on the same horizontal line. If it's a push-pull door panel, verify that the door panels can slide smoothly without detaching from the slide rails.

Drawer:

- Inspect the drawers and ensure they function properly without derailing or collapsing. Check that each drawer can perform its duties during use.

The Connection of Wardrobe Cabinets:

The wardrobe is connected using 3-in-1 screws. The backboard is generally connected using millet nails. The cabinet boards are usually made of standard 18mm compressed solid wood particles. They are linked by 3-in-1 three-dimensional hardware that can be disassembled infinitely without affecting the link's firmness. There are two main methods for the backboard: insert board and nail board, with the insert board being the most reasonable choice.

Living in the Wardrobe after Installation:

After the wardrobe is installed, it generally has no smell, and you can move in immediately. However, if there are concerns, allow two to three days for the wardrobe to dry before moving in, or perform a formaldehyde test. To remove formaldehyde, open the doors and windows for ventilation, use green plants that can absorb formaldehyde, brew black tea and put it in the living room, or place activated carbon in different corners of the home.

AOSITE Hardware, Quality Comes First:

AOSITE Hardware is a brand that prioritizes quality. With a focus on quality control, service improvement, and fast response, AOSITE Hardware remains the top brand in the industry. The company invests in innovative production technology and product development to stay competitive. AOSITE Hardware's products, such as drawer slides and hinges, are known for being anti-radiation, UV-resistant, and of high quality. The company is dedicated to providing unique clothing and improving its brand image. AOSITE Hardware does not accept merchandise returns unless they are defective.