Spring hinge installation - can the spring hydraulic hinge be installed with an inner space of 8 cm?

Can the spring hydraulic hinge be installed with an inner space of 8 cm?

Yes, the spring hydraulic hinge can be installed with an inner space of 8 cm. Here is a step-by-step guide on how to install the hydraulic hinge:

Hydraulic hinge installation method:

Step 1: Choose the appropriate hinge based on the design requirements of the cabinet. This includes considering whether the door panel is a full cover, a half cover, or a built-in panel, and selecting the appropriate hinge type (straight bend, medium bend, or large bend).

Step 2: Determine the edge distance of the cup hole on the door panel based on the thickness of the side plate (usually 16mm or 18mm). Typically, the edge distance is 5mm. Drill a hinge cup hole on the door panel.

Step 3: Insert the hinge cup into the cup hole of the door panel, ensuring that the hinge and the edge of the door panel form a 90-degree angle. Secure the hinge using 4X16mm self-tapping screws, tightening them with a screwdriver through the two screw holes on the hinge cup.

Step 4: Move the door panel with the locked hinges to the cabinet body and align it with the side panel. Install two long holes first to test if the top and bottom are aligned. Adjust the position of the door panel to achieve the best fit, and then drill a round hole.

Step 5: Fine-tuning is necessary. Loosen a small screw on the hinge and adjust the large screw in front to fit the side panel of the hinge cover. Use the small screw to further adjust the tightness between the door panel and the side panel.

Step 6: Test the hinge adjustment using your experience. Readjust as needed until the door panel and hinge function properly and are aligned.

How to install the spring hinge:

Before installation, ensure that the hinge is compatible with the door and window frame and leaf. Check if the hinge groove matches the height, width, and thickness of the hinge. Confirm compatibility with the screws and fasteners connected to the hinge. The connection method of the hinge should match the material of the frame and leaf.

When installing, make sure that the axes of the hinges on the same leaf are on the same vertical line to prevent issues with the door and window leaves.

Spring Hinge Installation:

Spring hinges are available in full cover, half cover, and built-in options. With full cover hinges, the door completely covers the side panel of the cabinet, leaving a gap between the two for safe opening. Half cover hinges are used when two doors share a side panel, requiring a specific total clearance between them. Build-in hinges are used when the door is inside the cabinet, next to the side panel, also requiring a gap for safe opening.

Spring hinge installation requires considering the minimum clearance, which is the minimum distance from the side of the door required for opening. The minimum clearance is determined by various factors, including the C distance, door thickness, and hinge type. Different hinge models have different maximum C sizes, with larger C distances resulting in smaller minimum gaps.

The covering distance of the door, whether full cover, half cover, or inner door, also affects the installation. Full cover refers to the distance from the outer edge of the door to the outer edge of the cabinet, half cover refers to the distance between two doors, and inner door refers to the distance from the outer edge of the door to the inner edge of the cabinet side panel.

Spring hinge installation precautions:

- Ensure the hinge matches the door and window frame and leaf.

- Check if the hinge groove matches the height, width, and thickness of the hinge.

- Confirm compatibility with screws and fasteners.

- Match the connection method of the hinge with the material of the frame and leaf.

- Identify which leaf plate should be connected with the fan and which should be connected with the door and window frame.

- Ensure the axes of the hinges on the same leaf are on the same vertical line.

- Use a 4mm hexagonal key to open the hinge while installing it.

- Avoid exceeding four rotations when adjusting the hinge.

- The opening angle should not exceed 180 degrees.

- Loosen the hinge by following the same operation as in step 1.

In conclusion, the installation of spring hydraulic hinges with an inner space of 8 cm is possible. Following the given instructions and precautions will help you ensure a successful installation.