Steel structure workshop sliding door track - How to fix the sliding door slide rail on the composit

Sliding doors are commonly used in workshops due to their space-saving design and ease of use. This article will guide you through the process of installing sliding doors on composite panel walls of steel structure workshops, offering step-by-step instructions for a successful installation.

Step 1: Inspect the Products

Before starting the installation, carefully check the sliding door products and spare parts to ensure they are in good condition.

Step 2: Prepare the Workspace

Lay the door frame material facing up on a protected surface to avoid scratches. It is recommended to place cardboard or carpet on the ground.

Step 3: Install the Sliding Door on the Hanging Rail

Place the upper sliding wheels into the correct order in the upper chute. Assemble the frame and horizontal frame accurately and secure them with half-section self-tapping screws. Pay attention to the position of the pulley to avoid rework.

Step 4: Place the Installed Door Frame

Hang the left and right door frame edge seals horizontally and vertically. Punch holes for positioning and secure them with expansion screws. Adjust the gap with a thin plate if too large.

Step 5: Install the Transom Window (if applicable)

For transom windows, align them horizontally and vertically and fix them with expansion screws. If the gap is too large, use thin wood chips. Slide the door upwards and fix the transom window with screws. Without a transom, drill the appropriate position on the upper chute and fasten with a top screw.

Step 6: Fine-tune the Door Frame

Ensure the door frame is aligned, leveled, and vertical. Secure all screws tightly.

Step 7: Hang the Sliding Door on the Rail

Check if the pulleys are at the same height and match the site's height. Adjust if necessary. Hang the sliding door on the rail, ensuring the correct orientation.

Step 8: Adjust the Level and Install Positioning Wheel

Fine-tune the level of the upper pulley. Install the positioning wheel on the sliding door according to the installation position determined in the vertical state. Fix it with the correct screw.

Step 9: Finalize the Installation

Check the evenness of the gap between the two doors. Fine-tune if necessary and ensure the door leaf is level, the lock functions correctly, and the waving effect is smooth and safe. Secure positioning wheel screws, tighten upper sliding wheel adjustment screw, and reinstall the sliding door.

Step 10: Maintenance and Clean-up

Cover all holes with plugs. Spray self-spraying wax on the upper sliding suspension wheel, locks, and other parts to reduce noise and increase smoothness. Clean the surface and surroundings for proper sanitation.

Installing sliding doors on composite panel walls of steel structure workshops requires careful preparation and precise execution. By following these step-by-step instructions, you can ensure a successful installation and enjoy the many benefits offered by sliding doors.

Extended Information:

Sliding doors are versatile and cater to various needs, from traditional plate surfaces to glass, fabric, aluminum alloy profiles, and more. They are widely used in workshops, factories, warehouses, and many other applications.

Maintenance tips:

Regularly clean the tracks and avoid heavy objects hitting them. Use non-corrosive cleaning fluid. If mirrors or panels are damaged, seek professional assistance for replacement. Check the anti-jump device regularly. If the door is not tight against the wall, adjust the lower pulley screw.