How to Install Drawer Slides?

The process of installing drawer slides and other cabinet hardware is fairly straightforward. As long as the correct measurement results can be achieved. Surface-mounting drawer slides is just a few simple steps, but the ultimate goal is to ensure optimum usability. Here's a quick and easy guide on how to install drawer slides and common types.

Types of drawer slides

Soft-Close Drawer Slides - Soft-close drawer slides prevent drawers from closing too hard. They are used extensively in the kitchen and have an adjustment mechanism that slows the drawers down when they are close to closing.

Ball Bearing Drawer Slides - This type of drawer slide uses steel ball bearings for smoother operation. Ball bearings reduce friction when the drawer goes in and out.

Full Extension Drawer Slides - For most types of cabinet hardware, full extension drawer slides are the most suitable option. The biggest feature of this design is that the drawer slides can be fully extended and have the maximum weight load.

Step 1: The first step is to mark the location of the slide rails inside the cabinet. The size and style of the drawer will determine the location of the drawer slides. Usually they tend to be located about halfway down the bottom of the cabinet. After marking the position of the slide, draw a line parallel to the top of the cabinet. Next, place the slides along the lines you made.

Step 2: To install the rails, hold them firmly on the marks you made, then insert the screws into the front and back of the rails. Once your screws and slides are in place, repeat on the other side of the cabinet.

Step 3: The next step is to mount another slide to the side of the drawer of your choice. Again, you'll want to mark the sides about halfway down the length of the drawer. If needed, use a spirit level to draw a straight line.

Step 4: After marking the sides of the drawer, extend one of the sliding extensions in the drawer slide all the way to the line you just drew. This is a good point to quickly see if the slide extension is aligned. If you need to lower or raise them a few millimeters, you can draw a new line.

Step 5:If you're happy with the location of the rail extensions, use the screws provided in the drawer rail kit to mount one side. Flip over and install the other side in exactly the same position as the other side.

Step 6: Insert the Drawer

The final step is to insert the drawer into the cabinet. Different drawer slides have slightly different mechanisms, but generally the ends of the slides are placed in tracks inside the cabinet. You'll know when the track is properly connected when you're in and out of very smooth motion.

You can contact us for assistance in installing soft-close drawer slides or ball bearing drawer slides from our range. We will provide free instructions for all products and can provide advice on how to install drawer slides. As a furniture accessories supplier, we offer a wide range of cabinet hardware, including full extension drawer slides, complete with electronic catalogues that are readily available.