Installation Of Electric Remote Control Tatami Lift
1. Determine the position of the desktop and the switch, embed the protective sleeve, and pass three wires with a diameter of 1.0 square millimeter or more and a five-core cable.
2. Determine the height of the floor (bottom board + lifter + desktop board + tatami thickness), then * floor It is recommended that the platform adopt a box structure. The height of the tatami floor is generally not less than 36cm.
3. Determine the size of the desktop, the general size is between 80-100cm, choose a square desktop.
4. The bottom plate, to ensure that the bottom plate is flat and stable.
5. A gap of 2mm should be reserved between the desktop and the cabinet to avoid friction between the desktop and the cabinet and affect the use. Suggest
6. The bar is installed and installed, so that the desktop and the floor are level.
7. The elevator is connected to the power supply, fixed in the center of the bottom plate, and the desktop is temporarily fixed on the elevator.
8. Start the power switch of the lifting platform, adjust the position, then adjust the flatness of the desktop and the floor, and fix the desktop board.
Change market and language