Installation Of Manual Tatami Lift
1. Determine the overall size and installation position of the desktop. It is recommended to control the overall size within the range of 70-90cm. Generally, a square desktop is selected.
2. Determine the height of the floor (bottom board + lifter + desktop board + tatami thickness), then * floor It is recommended that the platform adopt a box structure, which can be used for storing articles.
3. A clearance of about 2mm should be reserved between the desktop and the cabinet to avoid friction between the desktop and the cabinet and affect the use.
4. When installing the bar, pay attention to ensure that the desktop and the floor box are level.
5. Make a hole in the center of the desktop to install the handle, and the diameter is generally 10cm.
6. Make sure that the floor of the floor box is level and flat, and then fix the lower base of the elevator in the center of the floor.
7. Fix the upper mounting base of the elevator on the lower center of the table.
Change market and language