Gas Spring Struts: High-quality Controlled Gas Strut for Sofas by Chinese Manufacturers

Often customer-oriented, and it's our ultimate target to become not only probably the most reputable, trustable and honest provider, but also the partner for Noble Classical Handle, Tatami Hidden Handle, Stainless Steel Cabinet Hinge. We sincerely hope to cooperate sincerely with friends from all walks of life and contribute to the society. We take the customer's trust as the guidance because we want to pursue the long-term cooperation partner. It is our lifetime goal and vision to build a world-renowned enterprise with excellent product quality, deep technical force and reasonable product prices.

TIPS FOR A CORRECT INSTALLATION

The gas spring long life is a function of the correct lubrication of the seals. The spring must therefore always be installed with the rod directed downwards or with the rod guide in a lower position with respect to the cylinder attachment.

In some applications, as those described in figures above (e.g. car boots), the opening movement of the spring may cause it to rotate upwards between the fully open and fully closed position. Here also attention should be paid to installing the spring with the rod directed downwards when it is in its fully closed position, and compressed inside the cylinder. Such recommended position facilitates the lubrication of guide and seals, while delivering an excellent braking effect.

The rod surface is important for maintaining gas pressure and should therefore not be damaged by blunt or abrasive objects or by any corrosive chemical substance. When installing the gas spring, the upper and lower fittings should be aligned so that the seal is not under strain. The alignment must be maintained throughout the entire rod stroke. Should that not be possible, use jointed attachments which allow the alignment.

Vibrations on the machine to which the gas spring is applied may be discharged onto the seals through attachments that are connected too rigidly to the frame. Leave a small clearance between the fixing screws and the attachments or fix the spring using at least one jointed attachment.

We recommend fixing the spring using smooth pins and not threaded bolts as the thread crest, in contact with the attachment hole, exercises friction that may contrast the gas spring correct functioning.

When applying the gas spring, make sure the pulling forces are not greater than the gas spring thrust force, so that the normal rod sliding speed is not exceeded.

The normal operating temperature for a gas spring ranges between -30 °C and + 80 °C.

Particularly damp and cold environments may create frost on the seals and compromise the gas spring duration.

The gas spring has been designed and manufactured to lighten or counter-balance a weight that is otherwise very heavy for the operator or for the structure into which it is inserted. Any other use it may be put to (shock absorber, decelerator, stop) should be carefully assessed by the designer and the manufacturers with regard to durability of the spring and to safety.

We are constantly optimizing the production process of Controlled Gas Spring Gas Strut for Sofa products to further reduce production costs and improve production efficiency. We are constantly developing new products on the basis of consolidating the original products to meet the ever-increasing customer needs. We are trying to get for in depth cooperation with sincere shoppers, attaining a new result in of glory with customers and strategic partners.