Guide to Shop Gas Spring Lift in AOSITE Hardware

Aosite, since 1993

aosite01@aosite.com

gas spring lift generates high sales volume for AOSITE Hardware Precision Manufacturing Co.LTD since the establishment. The customers see great value in the product showcasing long-lasting durability and premium reliability. The features are greatly maximized by our innovative efforts throughout the production process. We also pay attention to the quality control in the material selection and finished product, which greatly reduces repair rate.

AOSITE has been constantly marketed toward the overseas region. Through online marketing, our products are widely spread over the foreign countries, so is our brand fame. Many customers know us from different channels like social media. Our regular customers give positive comments online, showcasing our great credit and reliability, which results in the increasing number of customers. Some customers are recommended by their friends who put their deep trust on us.

At AOSITE, service is the core competitiveness. We are always ready to answer questions at pre-sale, on-sale and after-sale stages. This is supported by our teams of skilled workers. They are also keys for us to reduce cost, improve efficiency, and minimize MOQ. We are a team to deliver products such as gas spring lift safely and timely.

Related Products

We are blessed with a group of staff that are qualified and well-trained. They have deep knowledge and expertise about products in the gas spring lift industry, which enables them to adapt themselves to different situations or customers' requirements.

Low-priced Gas Lift Supports Spring from Furniture Hardware Manufacturers

Gas Support Cabinet Lift System by Manufacturers

High-Quality, Automated Drawer Slide Manufacturing Machinery from China

Hydraulic Soft Close Hinge - High Quality Furniture Hardware from Furniture Hardware Manufacturers

Furniture Hardware Manufacturers - Powerful Gas Spring Mechanism for Heavy Lifting in Beds and Wall Beds

Adjustable Hydraulic Damping Cabinet Door Hinge - Supports Gas Spring

Furniture Gas Lift: High-Quality Hydraulic Pneumatic Support for Cabinet Doors in China

Hydraulic Gas Spring for Adjustable Kitchen Cabinets - Furniture Hardware Fittings - Furniture Hardware Manufacturers

Furniture Hardware Manufacturers: C1 Submersible Pump Kitchen Cabinet Door Gas Spring with Soft Up & Down Feature

Furniture Hardware Manufacturers of Gas Spring Lid Stays for Automobiles

High-quality Hydraulic Gas Spring (500N) Furniture Hardware Manufacturer

China's Top Lid Stay Gas Spring Manufacturers and Suppliers

Lid Stay Gas Spring: High Quality Soft Close and Elevation Control for Doors - Furniture Hardware Manufacturers

Tatami Cabinet Gas Spring for Bed: With or Without Cover, Manufacturers

Gas Spring Supports: Chinese Manufacturers for Oil and Gas Refinery & Petrochemical Construction

Furniture Hardware Manufacturers: Cabinet Air Support Gas Spring for W701 Door Stay

Cabinet Gas Struts: High-Quality Manufacturers in China

Pneumatic Gas Lift with Metal Fitting - Superior TV Lift Solution from Our Manufacturers

Adjustable Soft Close Lift Stay for Furniture: Gas Spring Lid Stay from Furniture Hardware Manufacturers

Cabinet Door Gas Spring: High-Quality Hydraulic Support Stay for Kitchen Cabinets from Furniture Hardware Manufacturers

AOSITE Hardware Precision Manufacturing Co.LTD has rich production experience in producing high quality and low cost gas spring lift.

How to assemble furniture(part 1)

How to assemble furniture(part 1)
‍
How to assemble the furniture is a problem. Do you understand how to install the furniture? After buying the furniture, the correct installation is very important. Today, I will introduce some installation methods and steps of custom furniture to help you better buy and Use customized furniture to ensure a good house decoration effect.

Check the packaging
First of all, when you receive the item, whether it is by express delivery or direct purchase, you must check whether the packaging is severely damaged. If there is, it is likely that the steel pipe inside is also crushed. Such goods must not be signed and purchased. Be sure to check it clearly.

Check accessories
Open the package, and then check whether the accessories inside are complete. There is a manual. Check it against the manual. If there are few, it is estimated that you can’t install it without installing it. Therefore, count it in advance to avoid wasting. When installing, be sure to wear gloves and read the instructions carefully.

How To Build A Drawer With Slides

Enhance Your Furniture's Functionality: A Comprehensive Step-by-Step Guide to Building a Drawer with Slides

Building a drawer with slides is a rewarding and enjoyable project that can significantly improve the functionality of your furniture or storage unit. By incorporating drawer slides, you can effortlessly access and store items while ensuring seamless opening and closing of the drawer. In this comprehensive guide, we will walk you through each step of creating a drawer with slides, providing detailed instructions to help you successfully complete this project.

Step 1: Precise Measurements

Begin by accurately measuring the designated space where your drawer will be placed. Measure the height, depth, and width of the opening, as well as the distance between the sides. These measurements are crucial in determining the appropriate size for your drawer. Take your time with this step, as precise measurements will ensure that your drawer fits perfectly and operates smoothly.

Step 2: Wood Cutting

Once you have determined the dimensions for your drawer, it's time to cut the wood. Utilize 1/2-inch-thick wooden boards for the front, back, and sides of the drawer, while a 1/4-inch-thick plywood board is ideal for the bottom. Use a saw to cut the boards according to the specific dimensions required. Take care to make clean and accurate cuts, as this will contribute to the overall quality and appearance of your drawer.

Step 3: Smoothing the Wood

After cutting the wood, it is essential to smooth down any rough edges and surfaces. Employ a sanding block and fine-grit sandpaper for this process. Start with a rougher grit to remove any roughness or imperfections, and then progress to a finer grit to achieve a smooth finish. Ensure that you eliminate any splinters, rough spots, or extra wood that might interfere with the smoothness of your drawer. Taking the time to achieve a smooth surface will enhance both the aesthetics and functionality of your finished drawer.

Step 4: Frame Assembly

Assemble the front, back, and sides of the drawer to construct a sturdy frame. Use wood glue and clamps to glue the wooden pieces together. Apply the wood glue liberally along the edges of the boards and then join them firmly. Employ a square to check for proper alignment at the corners and adjust as necessary. Once the glue has dried, you will have a strong and stable frame for your drawer.

Step 5: Installing the Drawer Slide

Once the frame is glued and dried, proceed to install the drawer slides. Drawer slides typically consist of two components – one to be attached to the frame and the other to the cabinet. To attach the slides to the frame, center them on both sides of the drawer and securely screw them in place. Use the provided screws and ensure that they are tightened firmly but not overtightened, as this can affect the smooth operation of the slides. Take your time with this step to ensure the slides are accurately positioned and securely attached.

Step 6: Attaching the Drawer Bottom

Attach the plywood board to the frame, creating the bottom of your drawer. Apply wood glue along the edges of the frame where the bottom will be attached. Place the plywood board on top of the frame, aligning the edges, and press down firmly to ensure a secure bond. To reinforce the attachment, utilize brad nails to further secure the bottom in place. Before nailing the bottom, check the fit of the drawer in the opening to ensure it slides easily and smoothly.

Step 7: Drawer Installation

The next step is to attach the second part of the drawer slide to the cabinet. Utilize a level to ensure the slide is aligned and level with the other slide. Carefully insert the constructed drawer into the designated opening and slide it into place. Take care not to force the installation; the drawer should slide in smoothly and effortlessly. Once the drawer is in place, test its movement by opening and closing it multiple times to ensure smooth sliding.

Step 8: Test and Adjust

Evaluate the functionality of the drawer by repeatedly opening and closing it. Test its smoothness and stability to ensure that the drawer slides seamlessly and securely. If necessary, make adjustments by slightly loosening the screws on the drawer slides and making necessary movements. Take your time with this step, as making small adjustments can make a significant difference in the overall functionality and longevity of your drawer.

In conclusion, constructing a drawer with slides is an accessible and satisfying project that significantly enhances the functionality of your furniture. By following these steps, you can create a robust and dependable drawer that provides smooth gliding for years to come. Whether you possess advanced woodworking skills or are just beginning, building a drawer offers an excellent opportunity to refine your abilities while creating an attractive and practical addition to your furniture collection. Enjoy the process and take pride in the finished product that will enhance the functionality and beauty of your furniture.

How To Use Gas Springs

Unlocking the Potential of Gas Springs: A Comprehensive Guide

Gas springs are a versatile and dependable technology that is widely used across various industries, including automotive, aerospace, furniture, and medical devices. In this comprehensive guide, we aim to provide you with a thorough understanding of gas springs, including their properties, installation, usage, and maintenance. Whether you are a professional in the field or someone looking to explore the potential of gas springs, this guide will equip you with the knowledge you need.

Understanding Gas Springs

Gas springs, also known as gas struts or gas lift supports, utilize compressed gas to exert force in a linear motion. They consist of a sealed tube filled with compressed gas, typically nitrogen or air, alongside a piston that moves within the tube. The outer tube acts as a cylinder, while the piston functions as a rod, connected to the load being raised or lowered.

Gas springs are available in a range of sizes, force ratings, stroke lengths, and end fittings. They can be used as standalone elements or combined with other mechanisms such as dampers, locks, or control valves to gain precise control over the load's motion.

Key Properties of Gas Springs

When selecting a gas spring for your application, it is crucial to consider several key properties:

1. Force: The force output of a gas spring is directly proportional to the pressure inside the tube and the piston's area. By adjusting the pressure or changing the piston size, you can fine-tune the force according to your needs.

2. Stroke: The stroke length represents the maximum distance the piston can travel from its fully extended to its fully compressed position. The tube length and piston rod determine this stroke length.

3. Speed: The speed at which the load moves relies on the gas spring's force and the load's mass. Damping features can be incorporated into gas springs to control speed, prevent excessive bouncing or oscillation, and ensure a smooth operation.

4. End Fittings: Gas springs are available with a variety of end fittings to cater to different applications. These can include threaded, clevis, eyelet, ball joint, or custom-designed fittings.

5. Environment: Gas springs are designed to operate within a wide temperature range, from -30°C to 80°C. Additionally, they exhibit resistance to corrosion, vibration, and impact. However, if exposed to harsh chemicals, UV light, or saltwater, specific coatings or materials may be necessary.

Installation Guidelines for Gas Springs

Proper installation of gas springs is paramount for optimal performance and safety. Here are some guidelines to follow:

1. Determine the required force and stroke length based on the load's weight and height. Consult the manufacturer's catalog or reach out to their technical support team for recommendations.

2. Choose appropriate end fittings that align with the orientation, direction, and available space for smooth operation.

3. Securely mount the gas spring to both the load and the frame using the recommended hardware and torque values. Avoid any over or under-tightening of fittings to prevent damage or leaks.

4. Ensure proper alignment by avoiding any bending or twisting of the piston rod. Use mounting brackets or pivot joints if necessary to achieve a straight-line operation.

5. Before and after installation, check the stroke length and force of the gas spring. Test the load's movement and control, adjusting the gas spring or other components as needed.

Tips for Using Gas Springs

While gas springs are generally easy to use and maintain, it is essential to follow these guidelines to ensure their longevity and reliability:

1. Apply force to the load gradually and smoothly to avoid any sudden shocks or jerks that may cause damage. Utilize a guide or stopper to prevent over-extension or compression of the gas spring.

2. Always operate gas springs within their rated force and stroke limits to prevent any potential damage to the gas spring or the load itself. If higher force or stroke length is required, select a gas spring with the appropriate rating or utilize multiple gas springs in parallel or series.

3. Periodically inspect the gas spring for leaks, corrosion, or wear. Check the piston rod, seals, end fittings, and mounting hardware for signs of damage or misalignment. Replace any damaged or worn components to prevent safety or performance issues.

4. Lubricate the gas spring regularly using a light oil or grease to reduce friction and extend its life. Avoid silicone-based or graphite-based lubricants as they may damage the seals or gas charge. Always follow the manufacturer's instructions for recommended lubricants and maintenance intervals.

In conclusion, gas springs offer a wide range of benefits and applications across various industries. By understanding their properties, proper installation guidelines, and maintenance tips, you can harness the full potential of gas springs while ensuring safety and reliability. Consult the manufacturer's catalog and technical support for specific recommendations and adhere to best practices for optimal performance. With this comprehensive guide, you can confidently select, install, and use gas springs for long-term success in your applications.

How To Install Gas Spring Lid Support

Installing a gas spring lid support is a straightforward task if you follow the correct steps. Gas spring lid supports are mechanical devices that lift and support lids or doors, commonly used in various applications like toy boxes, cabinets, and storage chests. This article will provide a detailed guide on how to easily install a gas spring lid support and offer additional tips for a successful installation.

Step 1: Gather the Necessary Tools and Materials

To begin the installation process, it's crucial to gather all the required tools and materials. These typically include a screwdriver, drill, drill bit, tape measure, level, and the gas spring lid support itself. Ensure that you have the correct type, size, and weight rating for your specific lid or door. Additionally, if your lid is made of wood or a soft material, you may need screws, washers, and nuts. Having all the necessary tools and materials on hand will make the installation process go smoothly.

Step 2: Measure the Lid for Support

Before drilling any holes or attaching the gas spring, accurately measure your lid's size and weight. This measurement will help determine the appropriate type and size of gas spring lid support needed. Selecting a support that can handle the lid or door's weight is crucial for proper functioning. Use a tape measure to determine the lid's length and width, and a scale or weight measurement tool to determine its weight. Taking precise measurements will ensure that you choose the right gas spring lid support for your specific lid or door.

Step 3: Mount the Gas Spring onto the Lid

The gas spring lid support typically consists of three parts: the cylinder, piston, and brackets. The cylinder is the long metal component, while the piston is the smaller cylinder that slides into the larger metal tube. Brackets are metal pieces used to attach the gas spring to the lid or door. Once you've determined the correct gas spring size and weight, you can proceed to mount the cylinder and piston onto the lid.

To mount the gas spring correctly, use the brackets provided with the support. Position them on either side of the cylinder and piston, then attach them to the lid using appropriate screws or bolts. Match the screws or bolts with the correct size for the brackets and lid material. Make sure to securely attach the brackets to the lid, allowing for smooth extension and retraction of the gas spring.

Step 4: Mount the Gas Spring onto the Cabinet or Frame

After attaching the gas spring lid support to the lid, proceed to mount it onto the cabinet or frame. Again, use the brackets to secure the gas spring to the frame or cabinet. Position the brackets correctly to ensure the appropriate balancing of the lid. Use screws or bolts to attach the brackets securely to the frame or cabinet. Double-check that everything is aligned and tightened properly to ensure the gas spring functions effectively.

Step 5: Test the Gas Spring Lid Support

Once the gas spring lid support is installed, it's crucial to test its functionality. Open and close the lid several times to ensure proper operation of the support. If the lid opens or closes too slowly or too quickly, or if the lid slams shut, adjustments to the gas spring or brackets may be necessary. Finding the ideal balance for the lid may require some trial and error, so be patient during this process.

By following these step-by-step instructions, installing a gas spring lid support becomes a hassle-free task. A lid support not only makes it easier to open and close heavy lids or doors but also protects the contents inside by preventing abrupt lid closures. Remember to always follow the manufacturer's instructions and select the correct size and weight rating for your gas spring. If you encounter any difficulties, don't hesitate to seek professional help or contact the manufacturer. With a little patience and attention to detail, you'll have a perfectly installed gas spring lid support that will make accessing your belongings a breeze.

How to adjust door hinges

Door hinges are one of the most ubiquitous components in homes and commercial buildings. Although most door hinges look like ordinary metal connectors, they have many functions and advantages in actual use. In this article, we’ll take a closer look at the various features and benefits of door hinges.

How to adjust door hinges
1. Balance the weight of the door

In most cases where door hinges are used, the door may be heavy or bulky. Due to the increased indoor volume and weight, door hinges play a vital role in supporting the weight of the door. The structure of door hinges can be designed and manufactured according to different needs to adapt to the weight of different types of doors.

2. Enhance the door structure

Another important function of door hinges is to enhance the structure of the door. The door hinge acts as a bridge between the door panel and the door frame, tightly fixing the door panel to the door frame to ensure the stability and safety of the door. Door hinges also increase the durability of your door, allowing it to withstand the wear and tear of daily use and the stresses of breaking down.

3. Increase door safety

Door hinges play an important role in security. Since doors are often used to separate different rooms and areas, it is important to ensure that they close securely and remain closed. Correct door hinge design ensures that the door has accurate flipping and installation, as well as working with the locking mechanism to ensure the safety of the door and improve the safety level of the building.

4. Increase the aesthetics of the door

Door hinges also enhance the appearance of your door. Since door hinges are part of the door, they have a great impact on the overall appearance of the door. The material, shape, and size of door hinges can be chosen according to the use and design of the building. Hinges can be paired according to the material and design of the panels to enhance the aesthetics of the door and match the architectural style.

5. Convenient maintenance and upgrades

The door hinges have a detachable design, which makes maintenance and upgrades more convenient. If the hinge is damaged, it can be easily removed and replaced with a new one. And because the hinges are swappable, they can also be upgraded with heavier-duty, stronger or better materials.

Door hinges serve a variety of functions, including balancing the weight of the door, enhancing the door's structure, increasing the door's security, increasing the door's aesthetics, and facilitating maintenance and upgrades. This makes it one of the important components used in buildings and homes. With the advancement of technology, modern hinges are not only functional but also have a stylish and modern appearance. This provides more options for the safety and design of buildings and homes. In either case, choosing the right door hinge will bring significant improvements in resource utilization, reliability, and speed, and is a critical component in buildings and homes.

Doors are a common decorative item in homes, and their hinges are the main supporting part of the door and also require regular maintenance and adjustment. Adjustment of door hinges can not only ensure the normal use of the door but also enhance the service life and safety of the door. But for many people, door hinge adjustment is not a simple task and requires certain skills and methods. Below, we will introduce in detail how to adjust the door hinges.

Adjustment of hinge tightness
1. As long as the door hinge is used for a long time, no matter in spring, summer, autumn or winter, it must be cleaned, lubricated and other maintenance work regularly. First, make sure the door hinge is clean and loosen the fixing nut.

2. Push the door open slowly and observe whether the door opens and closes normally. If there is any abnormality, make adjustments. You can use a screwdriver to adjust the hinge center screw according to the situation. Screws are generally loosened by turning counterclockwise and tightened by turning clockwise.

3. After confirming that the hinge functions normally, tighten the screws. Do not tighten or loosen the screws too much. Just the right amount of tightness.

2. Hinge position adjustment

1. In the process of adjusting the up and down position of the door hinge, first determine the vertical position of the hinge and the adjustment of the position against the wall. During the adjustment process, the door latch must be opened first, then removed and adjusted in sequence.

2. The position of the hinge should be adjusted to the center of the door frame as much as possible to ensure the balance and maneuverability of the door. Once the position is adjusted, tighten the hinge.

3. Adjust the hinge spacing

Adjusting Door Hinges and Height for Optimal Functionality
1. First clean the door hinges and remove the door part for easy adjustment.

2. Loosen the hinges, and then adjust the hinge spacing to the size you want. Too large or too small a spacing can affect the balance and maneuverability of the door.

3. After the hinge is adjusted, fix each screw. After the adjustment is completed, just leave the door silent.

4. Adjust the height of the door

Adjusting Door Plane and Vertical Angles for Stability and Balance

1. Adjustment of the plane angle. Sometimes we will find that the door is not completely flat and unstable. At this time, it is necessary to adjust the plane angle. Open the door slowly, then use a balancing tool to measure the plane of the door and make fine adjustments.

2. Adjust the vertical angle. If you find that the door does not open vertically enough, adjust the vertical angle. The plant strip is used to adjust the verticality of the door. Use a ruler to measure the adjusted door height so that it is balanced at the same angle as the vertical ground.

Summarize:
Although door hinge adjustment may seem troublesome, as long as you understand the hands-on skills and methods, it is a very simple task that only requires a certain amount of experience and patience. Therefore, we must pay attention to the maintenance and adjustment of door hinges, especially when selecting the right Door hinge manufacturer, in our daily lives. This will not only extend the service life of the door but also better ensure the safety and beauty of the home.

more products

Send your inquiry

AOSITE NCC Gas Spring For Aluminum Frame Door

AOSITE BKK Gas Spring For Aluminum Frame Door

AOSITE C20 Soft-Up Gas Spring(With Damper)

AOSITE C18 Soft-Up Gas Spring(With Damper)

AOSITE C12 Soft Up Gas Spring

we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.