Furniture Cabinet Handle

There are many friends who have lost their doorknobs. In fact, it's easier to understand, because the doorknobs are easy to break. With a little effort, they will be pulled out directly. Since the doorknobs are gone, do we have to consider installing them again? Then the question comes. What are the installation steps of doorknobs, Because Xiaobian doesn't know the relevant knowledge about the door handle installation, so there is no clue about the door handle installation steps.

Door handle installation steps:

1. Open the door so that you can operate both the internal and external door handles at the same time. Find the two screws on the cover of the inner door handle, which are fixed together by the inner and outer handle.

2. Turn the two screws counterclockwise with a crosshead screwdriver, pull the inner door handle away from the door, and pull the outer door handle away from the door.

3. Fix the outer edge of the latch panel door and remove the two screws with a crosshead screwdriver. Out of the door, pull out the latch plate assembly.

4. Put two fixed strike panels on the door frame with a cross screwdriver counterclockwise, pull the door frame plate off.

5. Place the new latch tab assembly through the hole on the edge of the door and bolt the curve part of the latch bolt that should point to the outside of the door. Wood screws attached to the door handle kit.

6. Into the door of the door from the outside to insert the outside door handle. Usually two sleeves, inside the latch hole of the cylinder, will fit. Press the door handle until the cover is close to the door.

7. Insert the door handle into the inside of the door from the inside of the door. Two fixing screws, thread the hole on the cover plate and the screw rotated clockwise to the outer door handle sleeve, tighten the screw and use a cross screwdriver.

8. On the curvilinear side of the door frame bent around the inner side of the door frame, fix the impact plate and the screws attached to the kit.