Three-dimensional Depth Adjustment Soft Closing Hinge

Three-dimensional depth adjustment soft closing hinge

Hinge is one of the widely used hardware parts on the cabinet, especially for wardrobe and cabinet. The damping hinge provides a buffer effect when the cabinet door is closed, reducing the noise and impact when the cabinet door is closed. Let's take a look at the wardrobe door hinge with "future home decoration network"? How to install the damping hinge

 How to choose wardrobe door hinge?

1. Weigh the material

The hinge quality is poor, and the cabinet door will be turned up and down after a long time, loose and sagging. The cabinet hardware of big brands are almost made of cold-rolled steel, which is stamped and formed at one time, with solid feel and smooth appearance. And because the surface coating is thick, it is not easy to rust, and the load-bearing is strong. The defective hinge is usually welded from thin iron sheet, which has no rebound force. If it is used for a long time, it will lose its expansion, resulting in the cabinet door not being closed tightly and even cracking.

2. Observe details

The details can see whether the goods are very good. The hardware used in good wardrobe hardware has a solid feel and a smooth appearance, so as to achieve the function of silence. Defective hardware is usually made of cheap metals such as thin iron sheet, and the cabinet door is astringent and even has a sharp sound.

3. Feel the hand

Hinges with different quality have different hand feel when used. Hinges with excellent quality are softer when opening the cabinet door, and will rebound actively when closed to 15 degrees, with very uniform rebound force.

How to install the damping hinge?

Installation of full cover door: the door completely covers the cabinet side plate, and there is a gap between the two so that the door can be opened safely.

Installation of half cover door: in this case, the two doors share a side plate, and there is a required small total gap between them. The coverage distance of each door is reduced accordingly, and hinge with hinged arm bending is required.

Installation of built-in door: in this case, the door is located in the cabinet, and it also needs a gap next to the side plate of the cabinet, so that the door can be opened safely. Hinge with hinged arm bending is required.

Small gap: small gap refers to the small distance of the door side required to open the door. The small gap is determined by distance C, door thickness and hinge type. When the door edge is rounded, the small gap is reduced accordingly.

Small clearance of half cover door: when two doors share a side plate, the total clearance required shall be twice the small clearance so that the two doors can be opened at the same time.