How to choose a door with stainless steel hinge

The position of the hinge has a certain proportional relationship with the height and width of the door. The proper position can ensure that the door opens freely and stably. We open the door several times a day. It is inevitable that door hinges will be damaged due to prolonged use. Generally, hinges have a certain service life. Under normal use, there are many early "strike" hinges. It is because of poor quality.

Reduced the frequency of damage replacement of the hinge, we should first control the quality of the hinge. When choosing a stainless steel door hinge, the main quality identification techniques are as follows:

1. When choosing the door hinge of stainless steel, from the surface we can see whether the surface material of the product is flat. If it is produced by scrap, the surface will be scratched and deformed.

2. The stainless steel hinge plays a role of switching the hydraulic pressure. A very important key is the damper of the hydraulic hinge and the assembly of rivets.

3. General stainless steel hinges are provided with two screws, and they are both up and down adjustment screws, front and rear adjustment screws, and some new models have left and right adjustment screws. You can use a screwdriver to adjust the upper and lower screws three to four times, and then remove the screws to check whether the indentation of the hinge arm is loose. Since the hinge arm is made of iron and is not as hard as the screw, it is easy to wear.

If you are buying any kind of stainless steel hinge, you must understand and check all aspects of it to see if the quality of the product has passed. This will make it better to use. For special applications, customers can customize to stainless steel manufacturers, has obtained better results, higher adaptability.