Production of stainless steel hinges

In the custom production of stainless steel hinges, the type of product structure and performance requirements determine the choice of production process. Therefore, stainless steel hinge manufacturers are required to have multiple sets of production technology systems. For example, stainless steel hinges can also use stamping or casting two production processes, then how to determine the production process of the hinge? It is mainly based on the customer's requirements. Under the premise of meeting the customer's requirements, which production process the customer wants to use, we will use which production process.

After the production process of the hinge is determined, we need to carry out specific production. Assuming that we have determined that the production process of the hinge is made by casting, then we can determine what kind of hinge processing is used in the future. Take, for example, this heavy-duty cabinet door hinge, which uses a cast hinged production process. Then the blanks produced by die-casting need to be polished. Last year, the burrs were checked for blanks, and the defective products must be picked out. Thread tapping is required where screws are required.

There is also the inspection of the shaft hole to see if there is residue in the hole and whether it will affect the installation of the shaft, especially for some load-bearing hinges, such as heavy oven hinges, you need to pay attention to whether the shaft is installed well.

A very important part of the production process of stainless steel hinges is the assembly of the hinge. The assembly of the hinge is simple and not simple. It mainly connects the two hinge blocks together through the hinge shaft, but after the shaft is installed, it is necessary to trust the two. The hinge block can rotate freely and flexibly, and no jamming can occur. Therefore, if this happens after installation, repairs are needed, which will have a great impact on the production of the hinge.