Tips for quality inspection of stainless steel hinges

Although the hardware of the same model is slightly different in micro data due to the different production parameters of different manufacturers, it is generally injurious by mistake, except for the determination of obvious unqualified products, which is caused by the particularity of the material The difference in the performance of the hardware accessories is that consumers have no way to tell in a short time. In order to choose a good quality stainless steel hinge, practical verification is very important. In this regard, the stainless steel hinge manufacturers have made the following summary for everyone in terms of practical methods and requirements, let's learn together:

1. Appearance, products manufactured by mature manufacturers will pay more attention to the appearance, and will be better treated on the line and the surface. Except for general scratches, there are no deep marks of cuts. This is Technical advantages of powerful manufacturers.

2. The speed of closing the door is even. Pay close attention to whether the stainless steel hinge is open or closed. If you hear abnormal sound, or the speed is too different, please pay attention to the different choice of hydraulic cylinder.

3. Anti-rust. The anti-rust ability can be observed with salt spray test. After 48 hours, rust will rarely occur under normal circumstances. For some polished products, the detection effect is better after grinding. Because polished stainless steel products have a layer of rust-proof film attached to the product, the success rate of direct testing is not high.

In short, the choice of stainless steel hinge depends on the material and feel. Good-quality hinges have a thick feel and a smooth surface, and because of the thick surface coating, they look brighter. Such a stainless steel hinge is strong and durable, has a strong load-bearing capacity, and the cabinet door can be stretched freely without the door being tightly closed.