High-quality Gas Spring Struts by Trusted Manufacturers

We are committed to the improvement and excellence of our Damping Angle Hinge, Ball Bearing Slides, Two Way Hydraulic Hinge through ongoing innovation, research and development. Our company is strong and has become a highly competitive company under the scientific management and honest operation. We provide foreign customers with the products they need in the shortest possible time.

TIPS FOR A CORRECT INSTALLATION

The gas spring long life is a function of the correct lubrication of the seals. The spring must therefore always be installed with the rod directed downwards or with the rod guide in a lower position with respect to the cylinder attachment.

In some applications, as those described in figures above (e.g. car boots), the opening movement of the spring may cause it to rotate upwards between the fully open and fully closed position. Here also attention should be paid to installing the spring with the rod directed downwards when it is in its fully closed position, and compressed inside the cylinder. Such recommended position facilitates the lubrication of guide and seals, while delivering an excellent braking effect.

The rod surface is important for maintaining gas pressure and should therefore not be damaged by blunt or abrasive objects or by any corrosive chemical substance. When installing the gas spring, the upper and lower fittings should be aligned so that the seal is not under strain. The alignment must be maintained throughout the entire rod stroke. Should that not be possible, use jointed attachments which allow the alignment.

Vibrations on the machine to which the gas spring is applied may be discharged onto the seals through attachments that are connected too rigidly to the frame. Leave a small clearance between the fixing screws and the attachments or fix the spring using at least one jointed attachment.

We recommend fixing the spring using smooth pins and not threaded bolts as the thread crest, in contact with the attachment hole, exercises friction that may contrast the gas spring correct functioning.

When applying the gas spring, make sure the pulling forces are not greater than the gas spring thrust force, so that the normal rod sliding speed is not exceeded.

The normal operating temperature for a gas spring ranges between -30 °C and + 80 °C.

Particularly damp and cold environments may create frost on the seals and compromise the gas spring duration.

The gas spring has been designed and manufactured to lighten or counter-balance a weight that is otherwise very heavy for the operator or for the structure into which it is inserted. Any other use it may be put to (shock absorber, decelerator, stop) should be carefully assessed by the designer and the manufacturers with regard to durability of the spring and to safety.

Based on the 100n Gas Spring Gas Strut industry, our company uses its own advantages, integrates superior resources, upholds the concept of win-win cooperation, and actively expands into new areas. We face the market with professional technology, healthy products and warm service. We have high-quality staff as well as technology and thoughtful pre-sale and after-sales service.