1. Kitchen handle selection: Don't choose too many textures for kitchen cabinet handles. Because the kitchen is used more frequently, the oily smoke is large, and the handles with too many textures are not easy to clean after being stained with oily smoke. If the handle is placed in the kitchen, you should choose durable and corrosion-resistant materials. Aluminum alloy handles are a good choice for the kitchen.

2. Handle selection in the hallway area: The handles in this area mainly include the handles of the hallway cabinet and the shoe cabinet. The handles placed in the hallway cabinet should emphasize their initiative.

3. Selection of handles for shoe cabinets: attention should be paid to its functionality, and single-headed handles whose color and panel are close to each other should be selected so as not to hinder the use of the kitchen.

What are the materials of the door handle? After the introduction of this article, I also know the material of the specific handle. I hope that when you buy the handle, you can know how to choose the material of the door handle, so that you can choose an easy-to-use door handle for daily use It’s not easy to make mistakes, causing various effects or troubles.

Hello,everyone.Welcome to Aosite hardware manufacture.This is Amy speaking.Today i will introduce you the modern handle.

The design style of this handle is not only modern and simple, but also solid aluminum casting, environmentally oxidation process, and a variety of sizes for homes decoration.

If you need,please contact us.Thanks for watching.See you next time.

How to choose a wardrobe handle

1. Look at the color

When choosing a handle, it depends on whether there is a protective film and scratches. The surface color of the handle, different types of handles will show different colors. For example, the color of the sanded wardrobe handle will be slightly dim but not old, and the semi-sand will have a straight dividing line at the junction of light and sand.

2. Look at the feel

When purchasing a handle, focus on experience, feel whether the surface of the handle is smooth, whether the edge is cut, and whether it pulls up smoothly. If it is smooth and smooth, it is basically a good-quality handle.

3. Listen to the sound

Gently tap the handle tube with a deadlift. If the sound is crisp, then the thickness is enough, if the sound is dull, it is a thin tube.

4. Choose a brand

At any time, the brand is the best guarantee, such as AOSITE.

Whether the epidemic is a danger or an opportunity for our foreign trade companies depends on the integration efficiency of our company's industrial chain.

Today's competition is the competition of the industrial chain, and the integration of various departments within the enterprise and the upstream and downstream of the enterprise will affect the competitiveness of the enterprise. The essence of enterprise competition is the efficiency of information collection and data processing and dissemination of the entire industry chain.

The thinking dimension of corporate management stays at different times, some still stay in the industrial age, and some bosses have already evolved into the data age.

In the industrial age, that is, in the 1990s, information is not transparent, and consumers have few channels for understanding products. Through mass production, enterprises save manpower through industrial equipment and reflect time efficiency. Save costs through batches and manufacture large quantities of products with the same specifications. Product iteration is slow, winning through market scale.

In the data age, information is basically transparent, and consumers have many channels for understanding products. Companies understand consumer needs, launch personalized products as soon as possible, and win through data processing efficiency. Product iteration is very fast.

How to Install Metal Drawer Slides

Furniture metal drawer slides are a convenient and practical household appliance, often used in drawers in furniture. It can make the drawer open and close more easily and flexibly, and it is more convenient to use. However, for someone installing furniture metal drawer slides for the first time, the installation process can be a bit complicated. The installation steps are described below.

Step 1. Prepare tools and materials

Before installing furniture metal drawer slides, you need to prepare the proper tools and materials. These tools include: screwdrivers, electric drills, rulers, and pencils. In terms of materials, you need to prepare: furniture metal drawer slides, screws, handles, etc.

Step 2. Measure and locate

Before starting the installation, the dimensions of the drawers and furniture need to be measured. To ensure that the material length and size of the metal drawer slides match the size of the drawer and furniture. After taking the size measurements, note the horizontal and vertical orientation lines that mark the mounting location.

Step 3. Remove old drawer seals

Before installing the new drawer metal slide rails, the old drawer cover needs to be removed. First, determine which drawer is involved in this installation. Afterward, use a screwdriver and electric drill to remove the closure panels and drawer material.

Step 4. Install the Drawer Material

After removing the sealing plate, the next step is to install the drawer material. Measure the length of the drawer material and drawer mounts according to the vertical and horizontal orientation lines you just marked, and install them into the furniture. Please note that the drawer material should match the size and position of the furniture.

Step 5. Install Furniture Metal Drawer Slides

The next step is to install the furniture metal drawer slides. Start by placing the slide rails on the bottom of the drawer and aligning them. After that, fix the slide rails to the drawer bottom with screws and an electric drill. Pay attention to the position of the screws when fixing, and be sure to avoid damaging the drawer material.

Step 6. Install the Drawer Pulls

When the drawer metal slides are installed, the final step is to install the drawer pulls. Select the location and measure the size according to the number of handles to be installed, and formulate a fixed plan and direction. The pulls are then manually coupled to the metal drawer slides with screws and the drawer pulls are secured to the drawer material.

In short, the above is the installation method of furniture metal drawer slide rails. As long as you follow the above steps step by step, and then check whether the fixing is firm, you can easily complete the installation of the metal slide rails of the drawer. Pay attention to details during installation, do a good job of safety protection, and follow the instructions and specifications to ensure safety and protect yourself.

Understanding the Basic Types of Metal Drawer Slides

When outfitting cabinetry and furniture with internal storage components, the type of metal drawer slides selected can significantly impact functionality and lifespan. Several common varieties exist to suit various weight capacities and applications.

Standard Slides

Considered the most basic style, standard slides feature simple roller ballbearings to facilitate smooth opening and closing. Constructed of steel, they efficiently support moderate drawer weights over time. Lacking premium features, standard slides offer reliable value.

Full Extension Slides

As their name implies, full extension slides fully extend drawers out of the cabinet for total access. Steel construction allows ones rated for over 100lbs capacity, though heavier slides may necessitate additional mount reinforcement. The extended travel maximizes usability.

Soft-Close Slides

Slides with integrated hydraulic or torsion cushioning gently lower drawers into place rather than letting gravity take over. This protects contents and prevents slamming noises, but soft-close mechanisms increase costs.

Ball Bearing Slides

Rows of steel or nylon bearings nestled in metal housings glide drawers with ultra-smooth motion. Ideal for industrial or high-cycle applications, they endure decades before needing replaced. Premium ball bearing slides offer durability at a higher price tag.

Undermount Slides

Designed for mounting completely below or within the cabinet box, these leave outer cabinetry surfaces unobstructed. Fewer visible parts leave a sleeker aesthetic, though installation complexity raises installation difficulty.

Side Mount Slides

Basic brackets attach these affordable slides to cabinet sides rather than underneath, saving costs versus undermount alternatives. Adequate for light-medium weight drawers in non-commercial use.

Selecting the correct slide type for each storage need optimizes functionality and spending based on specific weight, extension and durability requirements over the lifespan. Proper material pairing also influences performance.

Tools and Materials Needed for Installing Metal Drawer Slides

Installing drawer slides requires some basic tools and materials. Being prepared with the right equipment makes the job easier and ensures accurate placement of the slides.

Tools:

Tape measure

Pencil

Level

Power drill/driver

Screwdrivers (flat head, Phillips head)

Hammer

Rubber mallet

Needle-nose pliers

Wire cutters

Utility knife

Materials:

Drawer slides (select type and gauge appropriate for drawer weight)

Wood/metal drawer

Wood/metal cabinet boxes or furniture sides

Optional: construction adhesive

It's best to test slide operation before securing. Slide alignment and engagement of all locking parts must be verified. Measure and mark slide, drawer, and cabinet box locations with equal margins. Use a level to ensure structures are plumb. Drill pilot holes for screws to prevent splitting. Apply a small bead of construction adhesive under slides for added security, if desired.

Install drawer slides into cabinetry boxes first, aligning pre-drilled holes and securing with screws on both sides. For unsupported drawers, install anti-tip brackets. Position drawers on slides and slide partially into place. Attach drawer front bracket(s) and screw drawer sides to slides. Check for smooth operation.

Install clips, fasteners, or stops as needed to hold drawers at fully open or closed positions. Adjust any locking mechanisms. Proper tools and durable metal slides paired with sturdy wood structures last through many years of operation with this installation process. Always follow manufacturers’ instructions as well.

Step-by-Step Guide to Installing Metal Drawer Slides on Cabinet Drawers

Installing metal drawer slides properly is important for ensuring smooth, trouble-free operation of your cabinet drawers. Follow these steps for successful installation:

1. Measure the cabinet drawer opening and drawer front to determine the slide length needed. Add 1/2" for proper clearance.

2. Test fit the slides by fully inserting them into the cabinet box opening without attaching. Adjust placement for even overhang on both sides. 

3. Mark slide rail positions on the cabinet sides and drawer fronts with a pencil. Make sure slides are level and aligned.

4. Drill pilot holes through the mounting marks into cabinetry sides and drawer fronts/sides. Holes should be slightly larger than screws.

5. Position the outer slide rails into the cabinet box openings with the rear edge flush to the cabinet back. Secure in place with screws. 

6. Slide the drawer onto the runner rails from the front until it stops. Mark and drill holes to match rail locations on the drawer.  

7. Attach the drawer to the slides using screws inserted from inside the drawer box through predrilled holes. 

8. Adjust alignment as needed by slightly loosening screws until proper engagement is achieved. Fully tighten all hardware.

9. Install any additional brackets for stability such as anti-tip hardware for suspended drawers. 

10. Fully extend and close the drawer to test for smooth, even motion along the entire slide path. Readjust if binding occurs.

11. Repeat steps for remaining drawers, keeping drill holes and hardware consistent for aligned appearance. 

12. Install drawer fronts by screwing into cabinetry and drawer boxes.

With patience and attention to precise placement, quality metal slides provide lasting function and value when installed correctly for your cabinets. Enjoy hassle-free access to storage!

Tips for Maintaining and Lubricating Metal Drawer Slides

As a leading Drawer Slides Manufacturer of metal drawer slides, we want to ensure our customers get the longest life possible out of the products we produce. With proper care and maintenance, our slides are designed to provide smooth and reliable operation for many years. Here are some tips we share with customers.

Periodic Cleaning

We recommend wiping down slides with a clean, dry cloth every few months to remove any dust or debris. This prevents grit from accumulating that could accelerate wear. A soft brush can help in tight areas.

Routine Lubrication

Applying a small amount of dry silicone spray or lubricating oil to moving parts twice per year keeps slides operating like new. Avoid overloading with grease. Our slides already have protective coatings, so extra is unnecessary.

Inspect for Wear

Checking slides annually for any loose screws, bent components or other signs of excess wear allows small issues to be addressed before causing bigger problems down the line. Catching this early saves trouble.

Proper Conditions

High-moisture or harsh-duty environments may require more frequent lubrication and maintenance. Monitor slides in these applications accordingly to maximize service life.

Replacement Parts

Should damage occur despite best care habits, we stock replacement components to get draws moving smoothly once more. Don't struggle with problematic slides when upgrades are affordable.

With these simple do-it-yourself tips, our customers experience the smooth functionality and long-term durability we engineer into every drawer slide we produce. Please contact us directly with any other questions! Proper maintenance keeps our products providing excellent access for stored belongings.

Conclusion

In conclusion, properly installing metal drawer slides requires careful measurement, drilling, alignment, and fastening. Taking the time to accurately position and secure the slides will ensure smooth and trouble-free operation of cabinet or furniture drawers. Following the step-by-step installation guide outlined in this article provides the best approach for a successful installation. Key steps like test fitting, drilling pilot holes, leveling the slides and inspecting movement should not be overlooked. With the right tools and materials, along with patience and attention to detail, homeowners and professionals alike can install durable metal drawer slides that function reliably for many years. Professional installation may also be warranted for complex projects. Proper slide installation pays off in hassle-free storage access.

Pull handles and handles are commonly used items in our daily lives, and are widely used in furniture, doors, windows, kitchens and bathrooms, etc. Although they are all tools used to grasp or push and pull objects, they have different characteristics and uses. Let’s explore the difference between pulls and handles.

First, pulls and handles differ in shape. The handle is usually a straight line, with both ends connected to the door and window with fixed bolts. It can also be directly fixed on the surface of the object with advertising glue. Their main function is to hold and pull the door, window or drawer and other items with the hand. The handle is mainly a rotary object manipulation tool. They usually have the shape of a round handle or a grip. When used, the handle body can be rotated to control the opening and closing state of the object, such as the control handles of refrigerators, vacuum cleaners, mechanical equipment, etc.

Secondly, handles and handles are also different in how they are used. The handle is relatively simple to use. You only need to hold the handle with your hand and pull it up, down, left and right to complete the operation. The handle needs to twist the handle body. When the handle turns to the opening and closing state, it is necessary to use force and direction to control the handle body so that the operation can be completed.

Beyond that, pulls and handles serve different purposes. Handles are usually used on items such as large furniture, doors and windows, while handles are mainly used in various industrial production fields such as machinery and equipment, as well as in home areas such as kitchens, bathrooms, laundry rooms, and children's toys. The types and materials of handles are also more abundant, including metal, plastic, wood, etc. Different materials and shapes can be used in different environments and operating needs.

To sum up, although handles and handles are common operating tools, they have different usage methods, shapes and uses in many aspects. In our life and work, we must choose and use appropriate tools reasonably, so that we can improve work efficiency and ensure our own work safety.

As an integral part of furniture, the function of handles is to facilitate people to open furniture cabinet doors and drawers. With the changes of the times and changes in people's consumption concepts, the design and materials of handles are also constantly changing. So, what will be the development trend of furniture handles in the future?

1. Diversified design styles

In the future, different brands of furniture handles will promote diversified style designs, including popular, simple, medieval, retro and other elements to meet the needs of people of different ages, genders and professionals. For example, young consumers prefer interesting colors and geometric shapes, as well as playful and personalized handle designs, while older consumers pay more attention to practicality, comfort and healthy style, as well as the texture and ease of use of handles. .

2. Vector design

The future design of furniture handles will focus on vectorized design methods. Through advanced technical means, the handles of furniture handles will be decomposed into smaller vector parts, making the furniture handles more ergonomic and visual, and better adaptable to different styles. Furniture form improves product performance and aesthetics.

3. Environmentally friendly materials

With the increase in global environmental awareness and the continuous research and development of new materials, future furniture handles will use more environmentally friendly and sustainable materials, such as biodegradable resin, bamboo, ceramics, etc. This material has the characteristics of anti-oxidation, anti-corrosion, light weight, etc., and can also link the principles of environmental protection and fashion, and is favored by consumers.

4. Smart home

In the future, home appliances and furniture will form a more complete set, and furniture handles are no exception. The rapid development of the smart home market will bring innovation to furniture handles. For example, intelligent voice control technology is introduced into handles to control the opening and closing of furniture through voice commands and gestures, creating a more convenient and comfortable lifestyle for users.

5. Use virtual reality technology to develop new handles

Virtual reality technology is developing rapidly. In the future, the design of furniture handles will also use this technology to simulate the styles, sizes and materials of various handles, interact with consumers, and be able to more accurately adjust the design of the handles and coordinate them. to the development of new products.

The unique home experience created for customers is an important topic in the future home industry. From the perspective of the furniture handle industry, the development of furniture handles needs to combine market demand, the application of innovative technologies, improve product quality and brand reputation, and create high-quality products with outstanding market competitiveness, with the purpose of allowing consumers to benefit from home life.

As a handle supplier, we aim to provide customers with exceptional products that reflect our commitment to excellence and attention to detail. By continuously adapting to changing market trends and incorporating advanced manufacturing techniques, we strive to deliver products that not only meet but exceed customer expectations. Our focus on quality and innovation allows us to establish a strong brand reputation within the home furnishing industry. Through our dedication to providing a seamless and enjoyable shopping experience, we aim to foster long-term relationships with our customers. Experience care and concern in every detail when choosing our handles, as we are dedicated to promoting the long-term development of the home furnishing industry.