Damping Angle Hinge

Common classification

1. According to the type of arm body, it can be divided into slide-in type and clip-on type.

2. According to the covering position of the door panel, it can be divided into full cover (straight bend and straight arm) with 18% for general cover and half cover (middle bend and curved arm) with 9% for cover, with all the concealed (big bend and big curve) door panels hidden inside.

3. According to the style of hinge development stage, it can be divided into: first-stage force hinge, second-stage force hinge, hydraulic buffer hinge, touch self-opening hinge, etc.

4. According to the opening angle of the hinge, it is generally 95-110 degrees, especially 25 degrees, 30 degrees, 45 degrees, 135 degrees, 165 degrees, 180 degrees, etc.

In addition, there are various special specifications for spring hinges, such as inner 45-degree hinge, outer 135-degree hinge, and opening 175-degree hinge.

On the difference of three hinges of right angle (straight arm), half bend (half curve) and big bend (big curve):

 * Right-angle hinges allow the door to completely block the side panels;

* Half-curved hinges allow the door panel to cover some of the side panels;

* large bending hinge can make door plank and side panel parallel;