Kitchen Inseparable Damping Hinge
How to choose hinge
Weight by material
Poor hinge quality, cabinet door with a long time is easy to back up, loose droop. The cabinet hardware of big brands almost use cold rolled steel, one-time stamping forming, feel thick, smooth surface. Moreover, due to the thick surface coating, it is not easy to rust, strong and durable, strong bearing capacity, and poor quality hinge is generally made of thin iron sheet welding, almost no rebound, with a little longer time will lose elasticity, leading to the cabinet door is not closed tightly, or even cracking.
Experience the touch
The quality of the hinge is different, the quality of the hinge is soft when opening the door, close to 15 degrees will automatically rebound, resilience is very uniform. Consumers can open and close the cabinet door to experience the hand feeling.
On details
Details can be seen whether the product is good, so as to confirm whether the quality is outstanding. The hardware used in high-quality wardrobe hardware has thick handle and smooth surface, and even achieves the effect of silence in design. Inferior hardware is generally made of cheap metal such as thin sheet iron. The cabinet door is unsmooth and even has a harsh sound.
In addition to visual inspection and hand feeling, the hinge surface should be smooth, and the reset performance of hinge spring should be paid attention to. The quality of the reed also determines the opening angle of the door panel. A good reed can make the opening angle exceed 90 degrees.
Tips
The hinge can be opened 95 degrees, and both sides of the hinge can be pressed by hand to observe that the supporting spring sheet is not deformed and broken. The very solid product is qualified. The service life of inferior hinge is short, and it is easy to fall off, such as cabinet door and hanging cabinet, which is mostly caused by poor hinge quality.
The above is the introduction of how to choose hinges. In our life, many small things play a big role. As the saying goes, details determine success or failure. Therefore, Xiaobian thinks that we need to understand many small things in our life before we can use them accurately. This is also the reason why we need to know how to choose hinges.
PRODUCT DETAILS
H=Height of mounting plate D=Required overlay on the side pane K=Distance between door edge and drilling holes on hinge cup A=Gap between door and side panel X=Gap between mounting plate and side panel | Refer to the following formula to choose the arm of hinge, if you want to solve the problem, we must know "K" value, that's the distance drilling holes on the door and "H" value which is the height of mounting plate. |
AGENCY SERVICE
Aosite Hardware has been committed to promoting and promoting exchanges between distributors, improving the quality of service to distributors and agents.
Helping distributors to open up local markets, enhancing the penetration and market share of Aosite products in the local market, and gradually establishing an orderly regional marketing system, leading distributors to become stronger and bigger together, opening a new era of win-win cooperation.
Change market and language