Soft Close Hinges
Type | Clip on hydraulic damping hinge |
Opening angle | 100° |
Diameter of hinge cup | 35mm |
Finish | Nickel plated |
Main material | Cold-rolled steel |
Cover space adjustment | 0-5mm |
The depth adjustment | -2mm/+2mm |
Base adjustment (up/down) | -2mm/+2mm |
Articulation cup altitude | 12mm |
Door drilling size | 3-7mm |
Door thickness | 14-20mm |
HOW TO MAINTAIN THE HINGE? This requires us to pay attention to the following points: 1. If found loose hinge or door plank is not neat, should immediately use tools to tighten or adjust. 2. Sharp or hard articles shall not bump against the hinge surface during product use, which will easily scratch the plating layer and lead to rust. 3. When opening and closing the cabinet door, avoid overexerting to prevent the hinge from being violently impacted and affecting the service life of the product. |
PRODUCT DETAILS
MOUNTING-PLATE
NO | 1 | 2 | 3 |
Hole | Two holes | Four holes | Two holes |
H value | H=0/2 | H=0/2 | H=0/2 |
Mounting dimension | 37mm | 37mm | 37mm |
type | Clip on | Clip on | 3d Clip on |
ALTERNATIVE SCREW TYPES
*M8 dowel Specification: 8x10mm |
*M10 dowel Specification: 10x10mm |
Specification: 6.3x14mm | *Wood screw Specification: 4x16mm |
QUICK INSTALLATION
According to the installation data, drilling at the proper position of the door panel | Installing the hinge cup. | |
According to the installation data, mounting base to connect the cabinet door. | According to the installation data, mounting base to connect the cabinet door. | |
Change market and language