How to install a kitchen sink(2)

4. After the installation is completed, test the water tank, fill it with water, check whether there is water leakage, check whether the drainage process is smooth, whether there are water leakage, water seepage and other problems, and finally seal the edge of the water tank with silica gel to ensure that the gap between the water tank and the countertop is uniform.

What are the precautions for installing the sink

1. Before installing the faucet, thoroughly check whether there is any debris in the water pipe, so as to prevent debris from entering the faucet and damage the valve core and other seals, and cause blockage in serious cases. The water temperature of the faucet cannot exceed 90 degrees Celsius. In this way, in order to avoid damage to the faucet surface during installation, the installation operation

When working, put a faucet cover or faucet plastic bag on the faucet.

2. When installing bellows and braided pipes, be sure to pay attention to the tightening force. If it is too large, it will easily damage the thread, and if the force is too small, it may leak due to insufficient sealing, so the tightening force should be appropriate.